Not working on Arduino Pro Mini 3.3v ATMega 328

abouillot / narcoleptic

Automatically exported from code.google.com/p/narcoleptic

0 stars 0 forks source link

Not working on Arduino Pro Mini 3.3v ATMega 328 #3

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago

The library is imported into project - no problem.  The call to the delay 
method executes without error but I see no evidence that the thing is going to 
sleep.  I have monitored its current draw at ~17 mA and noted that it does not 
drop at all.  Any ideas would be greatly appreciated.

Original issue reported on code.google.com by donblayl...@gmail.com on 31 Jul 2013 at 1:33

GoogleCodeExporter commented 9 years ago

(not an narcoleptic expert)
Could it be that your power-led is still operational?

Original comment by rob.till...@gmail.com on 16 Sep 2013 at 11:06

GoogleCodeExporter commented 9 years ago

If the consumption is 17mA, then probably all the hardware is turned on.

I have also measured with "Mini Pro" and also described, but in German: 
http://www.s6z.de/cms/index.php/arduino/nuetzliches/9-winterschlaf-fuer-arduino

Original comment by schulz.m...@googlemail.com on 18 Oct 2013 at 12:21