Froze OSMC GUI when Arch interface is accessed on Chrome - Windows

SpaghettiC0des commented 8 years ago

Installed Arch on the OSMC via the addon installer. But when I accessed it on my windows machine, nothings shows up. Just the top navbar. I initially set the port to 4040, but when I open the chrome console, Arch was actually connecting to port 9090. But when I changed the port from 4040 to 9090, still, not working.

nicolasabric commented 8 years ago

@humbleBeginner I do have OSMC running on a PI at work I will have a look and let you now.

SpaghettiC0des commented 8 years ago

@nicolasabric Thanks. :+1:

nicolasabric commented 8 years ago

@humbleBeginner Sorry for the late reply but I finally managed to test OSMC. On my side everything is working as expected, note that I did not change the port numbers (HTTP and WebSocket). What I can suggest:

Verify the ports both HTTP and Web socket and be sure the same are used by Arch,
Ensure that you have the "Allow remote control by programs on other systems" checked in the "Remote control" section of the settings.

If issue is still there I would be interested in knowing what you have in the dev tools of your browser.

abricot / webinterface.arch

Froze OSMC GUI when Arch interface is accessed on Chrome - Windows #12