I used fretfind2d to 3d print a fretboard and it worked really. However one thing I noticed was that the fret slot width was slightly too wide. When I placed the actual frets into the 3d printed fretboard the tangs on the frets did not grab inside the slot. I was able to glue the frets in and this worked well, but a nice feature would be to specify the width of the fret slots when exporting to a svg or dxf file. I've attached a few pics of the fretboard and guitar. Great program
I used fretfind2d to 3d print a fretboard and it worked really. However one thing I noticed was that the fret slot width was slightly too wide. When I placed the actual frets into the 3d printed fretboard the tangs on the frets did not grab inside the slot. I was able to glue the frets in and this worked well, but a nice feature would be to specify the width of the fret slots when exporting to a svg or dxf file. I've attached a few pics of the fretboard and guitar. Great program
