search

actuino / light-pack

Automatically exported from code.google.com/p/light-pack
GNU General Public License v3.0
0 stars 0 forks source link

Reversed Colors #66

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Using lightpack
2.
3.

What is the expected output? What do you see instead?
Lightpack should project screen normally from back. 

Lightpack projects colors in reverse.

What version of the product are you using? On what operating system?
Prismatik 5.10.4, Windows 6

Please provide any additional information below.

Original issue reported on code.google.com by JaredGen...@gmail.com on 21 Jan 2014 at 9:37

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I think I have this problem as well! I'm sure I plug the cables correctly 
according to the Quick Install Guide. Going to try to re-plug the cables the 
other way around/in reverse

Original comment by michael....@gmail.com on 24 Jan 2014 at 8:30

Attachments:

GoogleCodeExporter commented 9 years ago 
set "Grab widgets appearance" to Color and make another screenshot, please

Original comment by tim.hell...@gmail.com on 10 Feb 2014 at 7:35

GoogleCodeExporter commented 9 years ago 
I have the exact same problem, tried to reinstall the software. That didn't 
help...

Original comment by enda2...@gmail.com on 15 Feb 2014 at 6:04

GoogleCodeExporter commented 9 years ago 
Not sure if it's gonna help/can be seen from the screenshot though, but here it 
is attached (colored.JPG)

I'm also attaching another with a different wallpaper than my first photo. 
(anotherExample.JPG)

In the end, I can sort of achieve what is the correct one by exchanging cables 
here and there to match (though the cables are very messy in the end and 
probably not as accurate as intended?)

Maybe the firmware in the hardware is faulty?

Original comment by michael....@gmail.com on 17 Feb 2014 at 8:38

Attachments:

GoogleCodeExporter commented 9 years ago 
I get pretty much the same problem. Some of the widgets don't correspond with 
the setup on my back of the TV (as followed in the Manual "Constellations"). Is 
there an alternative way within Prismatik to change the corresponding widgets 
on our screen with the positing behind the TV? Or possibly putting the possible 
"constellations" TV setups within Prismatik?

 I assume a quick-fix would be indeed to switch the lights around into different ports, but it just undoes the work of applying all those adhesives.

Original comment by matthew....@gmail.com on 18 Feb 2014 at 6:10

GoogleCodeExporter commented 9 years ago 
At the risk of sounding like a total idiot - I had this "problem" initially but 
realized I didn't have my calibration boxes in the right spots.  I had 
mismatched the box numbers with the LED strip numbers.  Double check your white 
or colored calibration windows and make sure they correspond with the correct 
LED strip, referring to the placement sheet that the Lightpack shipped with.

Original comment by radish01...@gmail.com on 19 Feb 2014 at 1:55

GoogleCodeExporter commented 9 years ago 
@radish: If you have to follow the widget numbers on screen, then the quick 
setup guide has it the other way around; Because:

On screen: Number 1 starts on the top left of the monitor (when viewed from 
front) BUT
On the user guide, Number 1 is also on the top left of the monitor (but viewed 
from the back)

Original comment by michael....@gmail.com on 20 Feb 2014 at 2:10

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
@Michael:
Yeah that's what I had done too - but depending on your "Constellation" setup 
that is not how they would correspond according to the chart.  For instance, I 
set mine up as Andromeda, and the Number 1 LED strip (according to the diagram) 
is on the bottom left corner of the back of the TV - or monitor in your case.  
From there, you'd put the number 1 widget box in that area of the TV/monitor 
screen - which should be the bottom right corner if you're looking at the 
front, and resize it to capture a certain area of color from your display.

Original comment by radish01...@gmail.com on 20 Feb 2014 at 2:29

GoogleCodeExporter commented 9 years ago 
My lightpack is also with this problem

Original comment by everton....@gmail.com on 13 Mar 2014 at 10:19

Attachments:

GoogleCodeExporter commented 9 years ago 
I have 2 lightpack. One of them inverts the colors of one of the strips
I am using Windows 8.1. Also gives error with Ubuntu

Original comment by everton....@gmail.com on 13 Mar 2014 at 10:24

Attachments:

GoogleCodeExporter commented 9 years ago 
did you try to connect the LED modules to other sockets? It seems the LED 
modules with defect.

Original comment by tim.hell...@gmail.com on 31 Mar 2014 at 9:59