search

aczid / crypto1_bs

Bitsliced Crypto-1 brute-forcer
199 stars 78 forks source link

crapto1 / craptev1 website is down #29

Closed matxbox closed 5 years ago

matxbox commented 6 years ago

Hi @aczid, first of all thanks for your work. I am trying to build crypto1bs but it gives me a 404 not found error when make tries to get the crapto1 and craptev1 packages. I went to the website you included in the makefile, under the get calls, and it gives me again 404 not found. I searched a lot but i don't know where to find those two, do you have something like a link to another mirror or else? Thanks in advance Mattia

jhill-cmd commented 6 years ago

hello. same issue here

aczid commented 6 years ago

Hi, I'm sorry but I have no control over the CraptEV1 code distribution. Its license explicitly forbids redistribution, that's why it might be hard to find online. That comment in the README you quote is very outdated but yes, the software was unavailable for this very license violation back then in 2016. The software has been available at the original URL for at least the past year, but has suddenly gone offline again. Please just keep an eye out for it to re-appear there.

askerlee commented 6 years ago

I requested these two files from Bla and he sent them to me immediately :D

matxbox commented 6 years ago

It worked for me too, Bla sent me the files about 10 min after I asked him!

aczid commented 6 years ago

Reopening this for visibility.

target111 commented 6 years ago

Hey there, I sent bla an email requesting those files about 2 days ago but he has yet to respond.. any other way I could obtain them?

aczid commented 6 years ago

The four word license states "No redistribution. No modifications." You can only legally get it from bla.

eyJhb commented 6 years ago

Trying to message Bla too, I really hate having to bug. Hope Bla returns with the files !

TriV3 commented 6 years ago

How can i contact Bla, in the hope to get the craptev1 and crapto1 libraries?

target111 commented 6 years ago

@TriV3 their gmail: blapost@gmail.com

Ricco29 commented 6 years ago

Hi I have the same problem but I have no news of Bla. can someone send me the files? thank you Eric

EDIT :it's ok, BLA send me the files

iPowerTech commented 5 years ago

Hi bro, the hardnested attack performed by craptev1 code was included into pm3 client. Maybe is possible to rewrite an open library porting all needed method from pm3 hardnested source... also me asked bla that files whit no response :/

Erhold commented 5 years ago

Hello everyone, As many, I'm currently looking for the two archives craptev1 and crapto1. Of course, my first move was to email Bla but, eh, no one can be available at all time. If anyone feels kind enough to send them to me at xxxyyyzzz (address deleted), that would be super nice from him / her ;-) Thanks in advance and have a good day, E.

Edit : Bla answered me very soon after my first message ==> thanks a lot anyway ;-) I guess I have to get to work now...

aczid commented 5 years ago

Just a reminder to everybody that redistribution of bla's code is not allowed by its license. The way forward is to port the existing hardnested attack from the proxmark3 codebase (GPL licensed) to a new project that interfaces with libnfc. I hinted at this in the README.

aczid commented 5 years ago

It looks like this will not be fixed. You can not get the files legally anywhere except from bla. @vk496 is working on integrating the proxmark3 implementation in an update for mfoc, at https://github.com/vk496/mfoc/tree/hardnested

EnnioEvo commented 5 years ago

It looks like this will not be fixed. You can not get the files legally anywhere except from bla. @vk496 is working on integrating the proxmark3 implementation in an update for mfoc, at https://github.com/vk496/mfoc/tree/hardnested

Does this hardnested work? Has someone tried it?

iceman1001 commented 5 years ago

just get a proxmark3 device and you will have full support for the fastest hardnested implementation currently in the whole world.

eyJhb commented 5 years ago

@iceman1001 what a ridiculous notion ... Yeah I will just shit out 275 EUR for a proxmark 3 device.

iceman1001 commented 5 years ago

@eyJhb It was a solution suggestion, If you don't like it, its fine. Your options now is to hope the fix at vk496 will be finished and merged to mfoc, by the looks at it I would say it may take some time. Or find the old hardnested solver that works with other devices.

A quick search on aliexpress gives alternatives, https://www.aliexpress.com/wholesale?catId=0&initiative_id=AS_20190226005332&SearchText=proxmark3

eyJhb commented 5 years ago

@iceman1001 there wasn't asked for a solution, it was a simple question of whether it worked or if anybody had tried it... - And saying, "just buy this world class equipment that costs a shit load of money", wouldn't really have been the best solution either if it were the case. :)

iceman1001 commented 5 years ago

@eyJhb keep it up! I am sure you will find your answers

dimitrire commented 5 years ago

Hello everyone, could someone tell me where can I find crapto1 / craptev1 please?

EnnioEvo commented 5 years ago

Write to blapost@gmail.com, he gave me the files just in one day.

SPECTERR commented 5 years ago

Hello everyone ! I'm not very good in this field, it's been a while since I deviated from this notions. That's why I would like to know, after recovering the two missing files, where should I place them to have a functional miLazyCracker? Thank you very much in advance !

dimitrire commented 5 years ago

Ecrivez à blapost@gmail.com , il m'a donné les fichiers juste en une journée.

Write to blapost@gmail.com, he gave me the files just in one day.

Thank you

dimitrire commented 5 years ago

Hello everyone, I wanted to install miLaziCracker but here is what it means to intallation

root@kali:~/miLazyCracker# ./miLazyCrackerFreshInstall.sh

make: *** [Makefile:34: get_craptev1] Error 8

make: *** [Makefile:38: get_crapto1] Error 8

There are errors to the installation, I still launched the script and here is what it marks in loop

root@kali:~/miLazyCracker# ./miLazyCracker.sh Found Mifare Classic Mini tag ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04

Fingerprinting based on MIFARE type Identification Procedure:

Try to authenticate to all sectors with default keys... Symbols: '.' no key found, '/' A key found, '\' B key found, 'x' both keys found [Key: ffffffffffff] -> [x.xxx] [Key: a0a1a2a3a4a5] -> [x.xxx] [Key: d3f7d3f7d3f7] -> [x.xxx] [Key: 000000000000] -> [x.xxx] [Key: b0b1b2b3b4b5] -> [x.xxx] [Key: 4d3a99c351dd] -> [x.xxx] [Key: 1a982c7e459a] -> [x.xxx] [Key: aabbccddeeff] -> [x.xxx] [Key: 714c5c886e97] -> [x.xxx] [Key: 587ee5f9350f] -> [x.xxx] [Key: a0478cc39091] -> [x.xxx] [Key: 533cb6c723f6] -> [x.xxx] [Key: 8fd0a4f256e9] -> [x.xxx]

Sector 00 - Found Key A: ffffffffffff Found Key B: ffffffffffff Sector 01 - Unknown Key A Unknown Key B Sector 02 - Found Key A: ffffffffffff Found Key B: ffffffffffff Sector 03 - Found Key A: ffffffffffff Found Key B: ffffffffffff Sector 04 - Found Key A: ffffffffffff Found Key B: ffffffffffff

Using sector 00 as an exploit sector Card is not vulnerable to nested attack MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic Trying HardNested Attack... libnfc_crypto1_crack ffffffffffff 16 B 4 B mfc_3bc9f5a9_foundKeys.txt ./miLazyCracker.sh: line 87: libnfc_crypto1_crack: command not found MFOC not possible, detected hardened Mifare Classic

Does anyone have the solution please Best Regards Dimitri

aczid commented 5 years ago

I don't think miLazyCracker actually works. Anyway, it's not my software and therefore it's not supported here.

EnnioEvo commented 5 years ago

miLazyCracker works, just:

dimitrire commented 5 years ago

Thank you for your answer, I will try later, but what'' and in the same folder open "MakeFile" and delete the two wget lines that try to download the 2 files from internet.' '

And' 'and manually run the lines from the first "make"' '.

SPECTERR commented 5 years ago

Hello,

First of all thank you for your answers, also thank you for giving me the instructions of executions. Only one last question bothers me, having no news of bla I searched and found the two tar files on the internet (tedious), so I managed to recover them, but I do not know if it is the good ones (these date from 2009), in the worst case a person could transfer them to me so that I can make a comparison?

Thank you very much in advance

milcrack@yopmail.com

eatbigger commented 5 years ago

dimitrire did you get the files from bla? If you did I can help you from there.

dimitrire commented 5 years ago

Yes, I have the files

ghost commented 5 years ago

Hello How to recovered the 2 missing files crapto1 and craptev1 because bra does not answer is what someone can send them to me? IcoderX@protonmail.ch

aczid commented 5 years ago

@vk496 has created an updated version of mfoc which applies the hardnested attack, please start using this tool. https://github.com/vk496/mfoc/tree/hardnested I've tested the tool and it works fine (but could still be faster). Thank you @vk496!

aczid commented 5 years ago

Closing this issue for good.

pengxueting commented 1 year ago

迪米特里尔 你从布拉那里得到文件了吗？如果你这样做了，我可以从那里帮助你。

Hello, I haven't got these two files, could you please send them to me? Please, this is my email: 2964631844@qq.com

Guidoob commented 1 year ago

Hi @aczid, first of all thanks for your work. I am trying to build crypto1bs but it gives me a 404 not found error when make tries to get the crapto1 and craptev1 packages. I went to the website you included in the makefile, under the get calls, and it gives me again 404 not found. I searched a lot but i don't know where to find those two, do you have something like a link to another mirror or else? Thanks in advance Mattia

Hello, is there any luck in my way someone can send me these famous files ? I would be so helpful. How you guys fixed this issue if you can't get these files ? Cheers

SimeoneVilardo commented 1 year ago

Hi @aczid, first of all thanks for your work. I am trying to build crypto1bs but it gives me a 404 not found error when make tries to get the crapto1 and craptev1 packages. I went to the website you included in the makefile, under the get calls, and it gives me again 404 not found. I searched a lot but i don't know where to find those two, do you have something like a link to another mirror or else? Thanks in advance Mattia

Hello, is there any luck in my way someone can send me these famous files ? I would be so helpful. How you guys fixed this issue if you can't get these files ? Cheers

Hi, the public redistribution of those files it's not permitted. Someone can send you the files privately if you specify an email address.

Guidoob commented 1 year ago

Hi @aczid, first of all thanks for your work. I am trying to build crypto1bs but it gives me a 404 not found error when make tries to get the crapto1 and craptev1 packages. I went to the website you included in the makefile, under the get calls, and it gives me again 404 not found. I searched a lot but i don't know where to find those two, do you have something like a link to another mirror or else? Thanks in advance Mattia

Hello, is there any luck in my way someone can send me these famous files ? I would be so helpful. How you guys fixed this issue if you can't get these files ? Cheers

Hi, the public redistribution of those files it's not permitted. Someone can send you the files privately if you specify an email address.

Hello Simeone, thanks a lot for your answer. Here is an email address : deb.stk@hotmail.fr

cheers