Closed techniq closed 7 years ago
hiya, we did the firmata port for arduino but have never worked with j5. the uart friend is just a pass thru uart. if you can get j5 working with firmata then the uart friend can just go in between.
last we tried it, the custom firmata doesn't work very well on uno or 32u4, so we dont recommend using it
only tips is lots of debugging, comparing uart traces between j5 and arduino, etc :)
@ladyada I think my confusion stems from what version of Firmata is needed to be flashed on the Nano (or any Arduino) to work with the UART Friend. Is BluefruitLE_nrf51822.ino not required? Can StandardFirmata be used as long as TX1/RX0 are wired to the TX0/RX1 on the UART Friend? I have no issues connecting to the Nano over USB order Bluetooth Classic using a JY-MCU adapter.
BluefruitLE_nrf51822.ino is optimized but has only been tested in SPI mode. for plain UART mode, you can probably use regular Firmata since its 'transparent' - just make sure you're in data not command mode
If I leave the MODE
pin not attached, and set the flip switch to UART, this should suffice, correct?
Thus far I haven't had any success trying this (with various Firmata versions). I've also set the MODE pin to ground.
Based on this:
it seems like the MODE pin is required and thus the "custom firmata" be used.
Sorry for all the trouble. I was really hoping switch from Bluetooth Classic to BLE was going to be fairly seamless, and choose the UART friend for this very reason:
Should I have chosen the SPI version instead?
Based on the following data read, it appears I'm getting a response (0xf9 0x02 0x03) from the Arduino over BLE:
ble-serial writing <Buffer f9> +4s
ble-serial writing <Buffer f0 79 f7> +1ms
ble-serial read <Buffer f9 02 03> true +86ms
Although I'm still not able to receive a "ready" event. At this point I think i need to work with firmata.js / johnny-five to try and see if the issue resides there.
One thing worth pointing out before I close the issue, I seem to be having a lot of odd issues with the UART Friend initializing / factory resetting. It seems 9 out of 10 times I have to close and reopen serial monitoring for the factory resetting of the UART Friend to succeed:
@ladyada Thanks for your help earlier. I wanted to report back I was able to successfully connect using fimata.js/johnny-five after changing the baudrate to 57600. I didn't know this was possible based on the description on the production page (I thought it was hard set to 9600) but after changing to CMD mode and running AT+BAUDRATE=57600
I am now in business (well, after also realizing I forgot to ground CTS
since I was using hardware uart pins 0/1.
Thanks again.
I've been having a lot of difficulty trying to get my new Bluefruit LE UART Friend to work with johnny-five/firmata.js. I've followed the instructions outline here and here to wire up and flash the special version of firmata to work with the module.
It appears to be able to connect using Node/johnny-five/firmata.js I need to use something like ble-serial or ble-serialport for the BLE virtualport, but thus far I've not had any success (it just hangs / times out). I have left a similar issue on ble-serial's issues, although I thought it was worth asking here.
I am able to connect to the device successfully using the Android Bluefruit LE app and can control the onboard LED (pin 13) of my Arduino Nano using the app under Pin I/O. I can also connect using the Bluefruit LE Desktop app (which uses javascript / noble library, but does not appear to use firmata / control I/O pins)
I've also seen a lot of discussion about merging the custom firmata for the nrf51822 in this repo into [StandardFirmataBLE](- https://github.com/firmata/arduino/tree/master/examples/StandardFirmataBLE), although it doesn't look like any progress has been made.
Any tips on how I can get this to work? My end goal is to connect via React-Native, but first steps is being able to connect using firmata.js from my Mac. Thanks.