After some random period of time I get reading error using the simplest example on Arduino IDE 2.3.2 and esp32 by espressif 2.0.17.
I am using Heltec Lora32 v3 ESP32-s3 based board
After "Failed to perform reading :(" bme688 values are fixed at a wrong value,
Temperature = 33.15 *C
Pressure = 773.86 hPa
Humidity = 100.00 %
Gas = 0.00 KOhms
After some random period of time I get reading error using the simplest example on Arduino IDE 2.3.2 and esp32 by espressif 2.0.17. I am using Heltec Lora32 v3 ESP32-s3 based board
After "Failed to perform reading :(" bme688 values are fixed at a wrong value, Temperature = 33.15 *C Pressure = 773.86 hPa Humidity = 100.00 % Gas = 0.00 KOhms
This is the logging
This is an example where I get error values