https://www.adafruit.com/product/5797
Yes please. For now I've mocked something up so don't worry about it, but appreciate a ping if it ever gets uploaded officially.
I went from the datasheet, but there was some ambiguity in the cable mid section(12mm here) and screen-end lengths, so there's minor differences to reality, the length and breadths etc should be correct. There's an image in the Circuitry Sketch with the datasheet section for reference, but I couldn't seem to adjust the aspect ratio so purely for dimension + shape reference.
https://www.adafruit.com/product/5797 Yes please. For now I've mocked something up so don't worry about it, but appreciate a ping if it ever gets uploaded officially.
I went from the datasheet, but there was some ambiguity in the cable mid section(12mm here) and screen-end lengths, so there's minor differences to reality, the length and breadths etc should be correct. There's an image in the
CircuitrySketch with the datasheet section for reference, but I couldn't seem to adjust the aspect ratio so purely for dimension + shape reference.You can turn off the circuitry / cabling, and a fake glue object that merges all into one for easier use, look at the Configuration Options at the top of the History Panel. https://cad.onshape.com/documents/d3a9f3df28b3f32c4c36bccd/w/f7af17cbf024f17fbe77fe10/e/da6b1654054b8322738013f3?renderMode=0&uiState=65355e29118cbe133e4f2c6c
Assembly - 3.2inch Touch Bar Display.step.zip