Open EAGrahamJr opened 1 month ago
NOTE This is not reproducible using "plain ol'" CP -- I put the same SSD1306 display on an RP2040 via the STEMMA port with the following packages:
Found device at /media/edgjr/CIRCUITPY, running CircuitPython 9.1.0.
adafruit_displayio_ssd1306==2.0.2
adafruit_framebuf==1.6.5
adafruit_ticks==1.0.13
adafruit_bus_device==5.2.9
adafruit_bitmap_font==2.1.2
adafruit_display_text==3.1.2
This suggests to me that the issue lies in the Blinka implementation of the bitmap_label
.
The following code (supplied by
todbot
on Discord and modified) shows that thebitmap_label
does not update (or very slowly/sporadically) while the "regular" version flies.Tested on Raspberry Pi Zero W,
bookworm
32-bitrequirements.txt
The expectation is that the behavior should be similar. I do not know if this behavior is present on other displays like this since this is the only one I have at the moment :smiley: