Open rickblair opened 5 years ago
A bit more info: I am running the code as a task pinned to a core: xTaskCreatePinnedToCore( codeForMQTT, "MQTTTask", 5000, NULL, 1, &padTask, 1);
That is why there is a while(1) in the loop code above. I got the same results when the code was running in loop instead of a pinned task.
Arduino board: Adafruit HUZZA 32 feather
Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.1
List the steps to reproduce the problem below (if possible attach a sketch or copy the sketch code in too):
I am using AdafruitIO Here is the callback: void onoffcallback(char *data, uint16_t len) {
Serial.print("Hey we're in a onoff callback, the button len -- value is: "); Serial.print(len); Serial.print(" -- "); Serial.println(data); String input = String(data); if(oldAlert.equals(input)) {
} oldAlert = input; if(input.startsWith("ON")) {
showAlert = true; } else { showAlert = false; } }
Here is the subscription code:
Adafruit_MQTT_Subscribe onoff = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME "/feeds/alert",MQTT_QOS_1); //Note tried all different QOS settings No change.
Here is loop:
MQTT_connect(); // onoffPub.publish(oldAlert.c_str()); while(1) { // Ensure the connection to the MQTT server is alive (this will make the first // connection and automatically reconnect when disconnected). See the MQTT_connect // function definition further below. MQTT_connect();
// wait 10 seconds for subscription messages // since we have no other tasks in this example. mqtt.processPackets(10000);
// keep the connection alive mqtt.ping(); } }
Every 10 seconds or a multiple of 10 seconds I get this output.
Hey we're in a onoff callback, the button len -- value is: 99 -- OFFARCODE: 1aa5da0357e4785b49b0202463d236c
It should just be either OFF or ON
I publish an ON message which shows up as expected: Hey we're in a onoff callback, the button len -- value is: 2 -- ON
Then an off message as expected: Hey we're in a onoff callback, the button len -- value is: 3 -- OFF
Then after about 20 secs I start getting: Hey we're in a onoff callback, the button len -- value is: 99 -- OFFARCODE: 2aa5da0357e4785b49b0202463d236c
I do have a barcode topic: Adafruit_MQTT_Publish barcodePub = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/barcode");
Where I publish a message in the callback. Somehow the string I use in the barcode is being used in the buffer in the subscribe code?
I can work around this, but it is disturbing to see random data showing up in a phantom subscription.