DEPRECATED! Please use Adafruit Blinka instead (was: Library to provide a cross-platform GPIO interface on the Raspberry Pi and Beaglebone Black using the RPi.GPIO and Adafruit_BBIO libraries.)
Thank you for creating a pull request to contribute to Adafruit's GitHub code!
Before you open the request please review the following guidelines and tips to
help it be more easily integrated:
Describe the scope of your change--i.e. what the change does and what parts
of the code were modified. This will help us understand any risks of integrating
the code.
Extend Platform.py to recognize tegra-aarch64-with-ubuntu
Use I2C Bus 1 for Adafruit-MotorHAT Library to run without error.
Describe any known limitations with your change. For example if the change
doesn't apply to a supported platform of the library please mention it.
Only extends standard TX2 Developer Kit setup.
Please run any tests or examples that can exercise your modified code. We
strive to not break users of the code and running tests/examples helps with this
process.
Tested through Adafruit-Python-MotorHAT library on a DC motor
and was able to communicate to MotorHAT motors connected to J21 TX2 Pin Header via I2C
Please elaborate on your standard testing techniques
Thank you again for contributing! We will try to test and integrate the change
as soon as we can, but be aware we have many GitHub repositories to manage and
can't immediately respond to every request. There is no need to bump or check in
on a pull request (it will clutter the discussion of the request).
Also don't be worried if the request is closed or not integrated--sometimes the
priorities of Adafruit's GitHub code (education, ease of use) might not match the
priorities of the pull request. Don't fret, the open source community thrives on
forks and GitHub makes it easy to keep your changes in a forked repo.
After reviewing the guidelines above you can delete this text from the pull request.
Thank you for creating a pull request to contribute to Adafruit's GitHub code! Before you open the request please review the following guidelines and tips to help it be more easily integrated:
Describe the scope of your change--i.e. what the change does and what parts of the code were modified. This will help us understand any risks of integrating the code. Extend Platform.py to recognize tegra-aarch64-with-ubuntu Use I2C Bus 1 for Adafruit-MotorHAT Library to run without error.
Describe any known limitations with your change. For example if the change doesn't apply to a supported platform of the library please mention it. Only extends standard TX2 Developer Kit setup.
Please run any tests or examples that can exercise your modified code. We strive to not break users of the code and running tests/examples helps with this process. Tested through Adafruit-Python-MotorHAT library on a DC motor and was able to communicate to MotorHAT motors connected to J21 TX2 Pin Header via I2C Please elaborate on your standard testing techniques
Thank you again for contributing! We will try to test and integrate the change as soon as we can, but be aware we have many GitHub repositories to manage and can't immediately respond to every request. There is no need to bump or check in on a pull request (it will clutter the discussion of the request).
Also don't be worried if the request is closed or not integrated--sometimes the priorities of Adafruit's GitHub code (education, ease of use) might not match the priorities of the pull request. Don't fret, the open source community thrives on forks and GitHub makes it easy to keep your changes in a forked repo.
After reviewing the guidelines above you can delete this text from the pull request.