search

adafruit / Adafruit_nRF52_Bootloader

USB-enabled bootloaders for the nRF52 BLE SoC chips
MIT License
461 stars 415 forks source link

Flashing on Arduino Nano 33 BLE? #94

Closed rpavlik closed 4 years ago

rpavlik commented 4 years ago

I see it's listed, and it builds, but adafruit-nrfutil doesn't work, and my simple bossac command didn't work either. (have used the reset button to get into bootloader, but still no dice) Do I need to find the swd pins? or is there a way to flash it e.g. like the .ino update-bootloaders for the samdx1 boards?

My command line was:

~/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1/bossac -d --port=ttyACM0 -b1 -U -i -e -w  _build-arduino_nano_33_ble/arduino_nano_33_ble_bootloader-0.2.13-19-ge25b63a_s140_6.1.1.hex -R

Didn't matter which hex I picked (with or without sd) neither of them appeared to actually have an effect, despite seeming to complete a flash process, I'd still get no MSC device and bossac showed the same ID.

ladyada commented 4 years ago

did you install the bootloader with a jlink as per https://learn.adafruit.com/circuitpython-on-the-nrf52/nrf52840-bootloader

rpavlik commented 4 years ago

No, I was hoping to not need a j-link, just have the bossac/sam-ba Arduino bootloader that it came with on it right now. I've only got stlinkv2, atmel-ice, and black magic probe, so looks like I've got the start of a new Adafruit order already with a j-link mini edu 😉

ladyada commented 4 years ago

black magic might be able to do it - but we have not tried it ourselves so we dont know the exact command to run

rpavlik commented 4 years ago

Ok thanks! I'll poke around and let you know if I figure it out with the bmp.

rpavlik commented 4 years ago

OK, so the BMP can do it too!

Pinout of bottom port is:

(see https://www.hackster.io/visualmicro/arduino-nano-33-iot-debugging-633ad8 - couldn't find a license ref for the arduino store's photo)

Assuming you've done the /etc/udev/rules.d/99-blackmagic.rules file to get a /dev/ttyBmpGdb symlink, the following flashes it: (I've put the commands into a single "one-liner" though I ran them separate. I could presumably put this in the makefile if you're interested):

gdb -nx --batch \
  -ex 'target extended-remote /dev/ttyBmpGdb' \
  -ex 'monitor swdp_scan' \
  -ex 'attach 1' \
  -ex 'load arduino_nano_33_ble_bootloader-0.2.13-19-ge25b63a_s140_6.1.1.hex' \
  -ex 'compare-sections' \
  -ex 'kill'

You'll get some warnings and stuff but they don't appear to affect it (too much, anyway) - it at least installs well enough to reboot and expose the nano33boot MSC device. Further flashes of the bootloader can be done as usual with make SERIAL=/dev/ttyACM1 BOARD=arduino_nano_33_ble all combinehex dfu-flash

However, it does disconnect/reconnect regularly - here's my dmesg with a 5.2 kernel

 [62476.400525] usb 3-1.2.2: New USB device found, idVendor=239a, idProduct=0063, bcdDevice= 1.00
[62476.400526] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[62476.400528] usb 3-1.2.2: Product: Nano 33 BLE
[62476.400528] usb 3-1.2.2: Manufacturer: Arduino
[62476.400529] usb 3-1.2.2: SerialNumber: E3D4B66F87C02642
[62476.457501] cdc_acm 3-1.2.2:1.0: ttyACM0: USB ACM device
[62476.457923] usb-storage 3-1.2.2:1.2: USB Mass Storage device detected
[62476.458014] scsi host9: usb-storage 3-1.2.2:1.2
[62477.467545] scsi host9: scsi scan: INQUIRY result too short (5), using 36
[62477.467548] scsi 9:0:0:0: Direct-Access     Adafruit nRF UF2          1.0  PQ: 0 ANSI: 2
[62477.467760] sd 9:0:0:0: Attached scsi generic sg1 type 0
[62477.468072] sd 9:0:0:0: [sdb] 8000 512-byte logical blocks: (4.10 MB/3.91 MiB)
[62477.468283] sd 9:0:0:0: [sdb] Write Protect is off
[62477.468284] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[62477.468480] sd 9:0:0:0: [sdb] No Caching mode page found
[62477.468482] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[62477.477314]  sdb:
[62477.478675] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[62664.137348] usb 3-1.2.2: USB disconnect, device number 87
[62664.146033] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[62668.202655] usb 3-1.2.3: new full-speed USB device number 88 using xhci_hcd
[62668.304452] usb 3-1.2.3: New USB device found, idVendor=239a, idProduct=0063, bcdDevice= 1.00
[62668.304454] usb 3-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[62668.304455] usb 3-1.2.3: Product: Nano 33 BLE
[62668.304456] usb 3-1.2.3: Manufacturer: Arduino
[62668.304457] usb 3-1.2.3: SerialNumber: E3D4B66F87C02642
[62668.361597] cdc_acm 3-1.2.3:1.0: ttyACM0: USB ACM device
[62668.362636] usb-storage 3-1.2.3:1.2: USB Mass Storage device detected
[62668.362807] scsi host9: usb-storage 3-1.2.3:1.2
[62669.371968] scsi host9: scsi scan: INQUIRY result too short (5), using 36
[62669.371972] scsi 9:0:0:0: Direct-Access     Adafruit nRF UF2          1.0  PQ: 0 ANSI: 2
[62669.372237] sd 9:0:0:0: Attached scsi generic sg1 type 0
[62669.372508] sd 9:0:0:0: [sdb] 8000 512-byte logical blocks: (4.10 MB/3.91 MiB)
[62669.372722] sd 9:0:0:0: [sdb] Write Protect is off
[62669.372723] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[62669.372933] sd 9:0:0:0: [sdb] No Caching mode page found
[62669.372937] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[62669.382049]  sdb:
[62669.383378] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[62968.521849] usb 3-1.2.3: USB disconnect, device number 88
[62968.531270] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[62968.837989] usb 3-1.2.3: new full-speed USB device number 89 using xhci_hcd
[62968.943450] usb 3-1.2.3: New USB device found, idVendor=239a, idProduct=0063, bcdDevice= 1.00
[62968.943452] usb 3-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[62968.943453] usb 3-1.2.3: Product: Nano 33 BLE
[62968.943454] usb 3-1.2.3: Manufacturer: Arduino
[62968.943454] usb 3-1.2.3: SerialNumber: E3D4B66F87C02642
[62969.001715] cdc_acm 3-1.2.3:1.0: ttyACM0: USB ACM device
[62969.002177] usb-storage 3-1.2.3:1.2: USB Mass Storage device detected
[62969.002289] scsi host9: usb-storage 3-1.2.3:1.2
[62970.014595] scsi host9: scsi scan: INQUIRY result too short (5), using 36
[62970.014598] scsi 9:0:0:0: Direct-Access     Adafruit nRF UF2          1.0  PQ: 0 ANSI: 2
[62970.014847] sd 9:0:0:0: Attached scsi generic sg1 type 0
[62970.015182] sd 9:0:0:0: [sdb] 8000 512-byte logical blocks: (4.10 MB/3.91 MiB)
[62970.015372] sd 9:0:0:0: [sdb] Write Protect is off
[62970.015373] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[62970.015563] sd 9:0:0:0: [sdb] No Caching mode page found
[62970.015565] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[62970.024412]  sdb:
[62970.025803] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[63269.033246] usb 3-1.2.3: reset full-speed USB device number 89 using xhci_hcd
[63269.193480] cdc_acm 3-1.2.3:1.0: ttyACM0: USB ACM device
[63569.097715] usb 3-1.2.3: USB disconnect, device number 89
[63569.106867] FAT-fs (sdb): unable to read boot sector to mark fs as dirty
[63569.416404] usb 3-1.2.3: new full-speed USB device number 90 using xhci_hcd
[63569.521817] usb 3-1.2.3: New USB device found, idVendor=239a, idProduct=0063, bcdDevice= 1.00
[63569.521819] usb 3-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[63569.521820] usb 3-1.2.3: Product: Nano 33 BLE
[63569.521820] usb 3-1.2.3: Manufacturer: Arduino
[63569.521821] usb 3-1.2.3: SerialNumber: E3D4B66F87C02642
[63569.577974] cdc_acm 3-1.2.3:1.0: ttyACM0: USB ACM device
[63569.578367] usb-storage 3-1.2.3:1.2: USB Mass Storage device detected
[63569.578493] scsi host9: usb-storage 3-1.2.3:1.2
[63570.585292] scsi host9: scsi scan: INQUIRY result too short (5), using 36
[63570.585295] scsi 9:0:0:0: Direct-Access     Adafruit nRF UF2          1.0  PQ: 0 ANSI: 2
[63570.585527] sd 9:0:0:0: Attached scsi generic sg1 type 0
[63570.585852] sd 9:0:0:0: [sdb] 8000 512-byte logical blocks: (4.10 MB/3.91 MiB)
[63570.586046] sd 9:0:0:0: [sdb] Write Protect is off
[63570.586048] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[63570.586241] sd 9:0:0:0: [sdb] No Caching mode page found
[63570.586244] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[63570.595108]  sdb:
[63570.596423] sd 9:0:0:0: [sdb] Attached SCSI removable disk

Also doesn't appear to be able to flash circuitpython - it takes it, takes a while to copy, activity light looks as expected (patterned blinking during copy, then shifts to a more frantic blinking), but it never resets on its own. When I reset it, I get the same bootloader MSC instead of the circuitpy one - not sure if that's expected for a qspiflash-less device.

Arduino's bossac also doesn't succeed - is this to be expected since it's not a samd chip?:

Arduino: 1.8.10 (Linux), Board: "Arduino Nano 33 BLE"

/home/ryan/apps/arduino-1.8.10/arduino-builder -dump-prefs -logger=machine -hardware /home/ryan/apps/arduino-1.8.10/hardware -hardware /home/ryan/.arduino15/packages -tools /home/ryan/apps/arduino-1.8.10/tools-builder -tools /home/ryan/apps/arduino-1.8.10/hardware/tools/avr -tools /home/ryan/.arduino15/packages -built-in-libraries /home/ryan/apps/arduino-1.8.10/libraries -libraries /home/ryan/Arduino/libraries -fqbn=arduino:mbed:nano33ble -vid-pid=239A_0063 -ide-version=10810 -build-path /tmp/arduino_build_949974 -warnings=more -build-cache /tmp/arduino_cache_595353 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=/home/ryan/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1 -prefs=runtime.tools.bossac-1.9.1-arduino1.path=/home/ryan/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1 -prefs=runtime.tools.openocd.path=/home/ryan/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino9 -prefs=runtime.tools.openocd-0.10.0-arduino9.path=/home/ryan/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino9 -prefs=runtime.tools.arm-none-eabi-gcc.path=/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4 -prefs=runtime.tools.arm-none-eabi-gcc-7-2017q4.path=/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4 -verbose /home/ryan/apps/arduino-1.8.10/examples/01.Basics/Blink/Blink.ino
/home/ryan/apps/arduino-1.8.10/arduino-builder -compile -logger=machine -hardware /home/ryan/apps/arduino-1.8.10/hardware -hardware /home/ryan/.arduino15/packages -tools /home/ryan/apps/arduino-1.8.10/tools-builder -tools /home/ryan/apps/arduino-1.8.10/hardware/tools/avr -tools /home/ryan/.arduino15/packages -built-in-libraries /home/ryan/apps/arduino-1.8.10/libraries -libraries /home/ryan/Arduino/libraries -fqbn=arduino:mbed:nano33ble -vid-pid=239A_0063 -ide-version=10810 -build-path /tmp/arduino_build_949974 -warnings=more -build-cache /tmp/arduino_cache_595353 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=/home/ryan/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1 -prefs=runtime.tools.bossac-1.9.1-arduino1.path=/home/ryan/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1 -prefs=runtime.tools.openocd.path=/home/ryan/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino9 -prefs=runtime.tools.openocd-0.10.0-arduino9.path=/home/ryan/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino9 -prefs=runtime.tools.arm-none-eabi-gcc.path=/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4 -prefs=runtime.tools.arm-none-eabi-gcc-7-2017q4.path=/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4 -verbose /home/ryan/apps/arduino-1.8.10/examples/01.Basics/Blink/Blink.ino
Using board 'nano33ble' from platform in folder: /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3
Using core 'arduino' from platform in folder: /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3
Detecting libraries used...
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -w -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -mcpu=cortex-m4 -w -x c++ -E -CC -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /tmp/arduino_build_949974/sketch/Blink.ino.cpp -o /dev/null
Generating function prototypes...
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -w -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -mcpu=cortex-m4 -w -x c++ -E -CC -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /tmp/arduino_build_949974/sketch/Blink.ino.cpp -o /tmp/arduino_build_949974/preproc/ctags_target_for_gcc_minus_e.cpp
/home/ryan/apps/arduino-1.8.10/tools-builder/ctags/5.8-arduino11/ctags -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives /tmp/arduino_build_949974/preproc/ctags_target_for_gcc_minus_e.cpp
Compiling sketch...
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /tmp/arduino_build_949974/sketch/Blink.ino.cpp -o /tmp/arduino_build_949974/sketch/Blink.ino.cpp.o
Compiling libraries...
Compiling core...
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/variant.cpp -o /tmp/arduino_build_949974/core/variant.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-gcc -c -Wall -Os -g -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt -o /tmp/arduino_build_949974/core/itoa.c.o /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/itoa.c
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/Interrupts.cpp -o /tmp/arduino_build_949974/core/Interrupts.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/USB/USBSerial.cpp -o /tmp/arduino_build_949974/core/USB/USBSerial.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/PluggableUSB.cpp -o /tmp/arduino_build_949974/core/api/PluggableUSB.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/Common.cpp -o /tmp/arduino_build_949974/core/api/Common.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/USB/PluggableUSBDevice.cpp -o /tmp/arduino_build_949974/core/USB/PluggableUSBDevice.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/Tone.cpp -o /tmp/arduino_build_949974/core/Tone.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/Serial.cpp -o /tmp/arduino_build_949974/core/Serial.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/wiring_shift.cpp -o /tmp/arduino_build_949974/core/wiring_shift.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/main.cpp -o /tmp/arduino_build_949974/core/main.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/USB/USBCDC.cpp -o /tmp/arduino_build_949974/core/USB/USBCDC.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/WMath.cpp -o /tmp/arduino_build_949974/core/WMath.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/IPAddress.cpp -o /tmp/arduino_build_949974/core/api/IPAddress.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/wiring_digital.cpp -o /tmp/arduino_build_949974/core/wiring_digital.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/wiring_analog.cpp -o /tmp/arduino_build_949974/core/wiring_analog.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/abi.cpp -o /tmp/arduino_build_949974/core/abi.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/wiring.cpp -o /tmp/arduino_build_949974/core/wiring.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/Print.cpp -o /tmp/arduino_build_949974/core/api/Print.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/Stream.cpp -o /tmp/arduino_build_949974/core/api/Stream.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/String.cpp -o /tmp/arduino_build_949974/core/api/String.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -c -Wall -g -Os -nostdlib @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/defines.txt @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/cxxflags.txt -DARDUINO_ARCH_NRF52840 -MMD -mcpu=cortex-m4 -DARDUINO=10810 -DARDUINO_ARDUINO_NANO33BLE -DARDUINO_ARCH_MBED -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE -I/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/api/deprecated -iprefix/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/includes.txt /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/cores/arduino/mbed/platform/cxxsupport/mstd_mutex.cpp -o /tmp/arduino_build_949974/core/mbed/platform/cxxsupport/mstd_mutex.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/itoa.c.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/Interrupts.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/Serial.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/Tone.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/USB/PluggableUSBDevice.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/USB/USBCDC.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/USB/USBSerial.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/WMath.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/abi.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/Common.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/IPAddress.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/PluggableUSB.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/Print.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/Stream.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/api/String.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/main.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/mbed/platform/cxxsupport/mstd_mutex.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/wiring.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/wiring_analog.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/wiring_digital.cpp.o
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-ar rcs /tmp/arduino_build_949974/core/core.a /tmp/arduino_build_949974/core/wiring_shift.cpp.o
Archiving built core (caching) in: /tmp/arduino_cache_595353/core/core_arduino_mbed_nano33ble_1bf7e20957ca55ec988e85ec7f0e7f8f.a
Linking everything together...
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-g++ -L/tmp/arduino_build_949974 -Wl,--gc-sections -Wall -Wl,--as-needed @/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/ldflags.txt -T/home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/linker_script.ld -Wl,-Map,/tmp/arduino_build_949974/Blink.ino.map --specs=nano.specs --specs=nosys.specs -o /tmp/arduino_build_949974/Blink.ino.elf /tmp/arduino_build_949974/sketch/Blink.ino.cpp.o /tmp/arduino_build_949974/core/variant.cpp.o -Wl,--whole-archive /tmp/arduino_build_949974/core/core.a /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/libs/libmbed.a /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/libs/libcc_310_core.a /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/libs/libcc_310_ext.a /home/ryan/.arduino15/packages/arduino/hardware/mbed/1.1.3/variants/ARDUINO_NANO33BLE/libs/libcc_310_trng.a -Wl,--no-whole-archive -Wl,--start-group -lstdc++ -lsupc++ -lm -lc -lgcc -lnosys -Wl,--end-group
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-objcopy -O binary /tmp/arduino_build_949974/Blink.ino.elf /tmp/arduino_build_949974/Blink.ino.bin
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-objcopy -O ihex -R .eeprom /tmp/arduino_build_949974/Blink.ino.elf /tmp/arduino_build_949974/Blink.ino.hex
/home/ryan/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/bin/arm-none-eabi-size -A /tmp/arduino_build_949974/Blink.ino.elf
Sketch uses 75876 bytes (7%) of program storage space. Maximum is 983040 bytes.
Global variables use 42152 bytes (16%) of dynamic memory, leaving 219992 bytes for local variables. Maximum is 262144 bytes.
Forcing reset using 1200bps open/close on port /dev/ttyACM0
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
PORTS {/dev/ttyACM0, } / {/dev/ttyACM0, } => {}
Uploading using selected port: /dev/ttyACM0
/home/ryan/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino1/bossac -d --port=ttyACM0 -U -i -e -w /tmp/arduino_build_949974/Blink.ino.bin -R 
No device found on ttyACM0
Set binary mode
An error occurred while uploading the sketch
Send auto-baud
Set binary mode

I don't have any other uf2's built for nrf52840 to test, unfortunately.

rpavlik commented 4 years ago

Oh, but if I call it an ItsyBitsy nrf52840, flashing "Blink" to it will blink the blue part of the RGB LED, which is something. Of course, your board defs use adafruit-nrfutil instead of bossac. The double-click of the reset button properly enters the bootloader instead of the sketch, which is also great.

rpavlik commented 4 years ago

OK, some of my small tweaks are up on https://github.com/adafruit/Adafruit_nRF52_Bootloader/pull/97 . Since I can't find the original bootloader's source code (see https://github.com/arduino/ArduinoCore-nRF528x-mbedos/issues/23 ), and adding SAM-BA/bossac support would probably increase code size a bit, I think my next approach will be to make a modified board definition for Arduino to use nrfutil instead of bossac.

rpavlik commented 4 years ago

OK, I see part of the issue with the UF2 part: The current.uf2 file is listed as only 512bytes (so 1 uf2 block) in size, compared to 598KB for my CPB. I get most of the same dmesg warnings on the CPB, so they're not related to my issues. The capacity of the "drive" is shown as the same (8000 512-byte logical blocks: (4.10 MB/3.91 MiB)), but for some reason the user portion of the flash isn't showing up right. Not sure why - comparing with the itsybitsy '840 (similar pin count) and feather '832 (same lack of qspi flash), the board config files look similar.

On the plus side, the nrfutil-used DFU stuff works fine, so I've been able to try a handful of bluefruit sketches.

hathach commented 4 years ago

closed due to lack of activities.