Closed kstisser closed 5 years ago
oops its here! https://github.com/adafruit/seesaw/releases/tag/1.1.4
@deanm1278 do we need a release for neotrellis?
I'd like to have releases with the production firmware for each board if possible.
On Wed, Sep 19, 2018 at 10:56 PM ladyada notifications@github.com wrote:
@deanm1278 https://github.com/deanm1278 do we need a release for neotrellis?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/adafruit/seesaw/issues/11#issuecomment-423023699, or mute the thread https://github.com/notifications/unsubscribe-auth/AGA5upxqHvCZ0aIaj4iLZTcSuYb4O_TLks5ucwPJgaJpZM4WxSEe .
problem is we link to 'latest' in the crickit guide, but latest is neotrellis only :/
Thank you for the quick response. However, I tried to flash the new file, but am getting an error: E:\ is not accessible. The request could not be performed because of an I/O device error. I followed the tutorial, with only the USB to microUSB in the Seesaw only connection to the computer. The Green light is on, and the yellow light is pulsing, but when I try to do anything with the windows explorer with the E drive it freezes up on me for a long time. When I try to copy the file you directed me to I get the error I mentioned above. Do you what might be wrong?
if you're running some sort of antivirus sometimes that confuses it - try disabling it or trying another computer, just drag the UF2 only!
I just performed the update with the UF2. Everything went okay; however, the cricket now flashes red about 5 times, pauses then continues to repeat. Is this normal or is the red flashing instead of solid green light something is wrong?
that means the DC power is bad :)
@deanm1278 this came up a few more times so i deleted the latest release
I am looking to update the firmware, and was following this guide which led me to your page: https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-construction-kit/update-your-crickit. However, they say drag the uf2 file onto the board. I did not see a uf2 file in any of the releases and it was not evident how to build one. Can you please help clarify how to get the uf2 file?