This issue is for a particular instance of a switch/button of the original poster. If someone else wants to test the same switch model, they should create a new issue.
The original poster can add additional test sessions to this issue (if they wish) by adding a comment.
Switch Info
Property
Description
Type
push button
Circuit
SPST
Function
Off-Mom (Normally Open)
Model info/markings
JUDCO 1024-2
Voltage & Current rating
14 V 2A ?
Product URL: Original discontinued by manufacturer. This looks like replacement. Digikey replacement forum topic.
How new is the switch? First time used in 8+ years. I think I originally got this from digikey a long time ago.
How do you like the switch? TERRIBLE FEEL! I'm not a button expert, but this has to be the least enjoyable button I've ever used. I can only hope that it isn't meant to be directly pressed. It probably is supposed to have some other mechanism in front of it. It barely moves (<1 mm?), makes no sound and I think I'll stop there before I get mad at a button... 😡
Photos
Marketing image:
Test Session 1
Setup
Property
Description
Arduino model
Uno (DIP)
Pull-up resistor
Arduino internal (measured 35.7k ohm)
Switch wires connection
Wire leads
Measure switch's ON resistance
0.3 ohms
Anything else connected?
none
Test Setup Photos:
Please upload picture(s) of your test setup showing how the switch is connected to your Arduino. Please be wary of insecure wires/connections as they can cause many signal glitches.
Results
Test Section Details
Any notes on how you did the fast/slow/... sections? Those test sections are optional.
Please note:
Switch Info
Product URL: Original discontinued by manufacturer. This looks like replacement. Digikey replacement forum topic.
How new is the switch? First time used in 8+ years. I think I originally got this from digikey a long time ago.
How do you like the switch? TERRIBLE FEEL! I'm not a button expert, but this has to be the least enjoyable button I've ever used. I can only hope that it isn't meant to be directly pressed. It probably is supposed to have some other mechanism in front of it. It barely moves (<1 mm?), makes no sound and I think I'll stop there before I get mad at a button... 😡
Photos
Marketing image:
Test Session 1
Setup
Test Setup Photos: Please upload picture(s) of your test setup showing how the switch is connected to your Arduino. Please be wary of insecure wires/connections as they can cause many signal glitches.
Results
Test Section Details
Any notes on how you did the fast/slow/... sections? Those test sections are optional.
📄 Raw Data
push-button-JUDCO-1024-2 (first use).txt
You can graph/analyze the data here.
🖼️ Summary Image
The first two pulses had very long bounces:
Still really bad when we exclude 3 extremes:
🕵️ Your Observations (optional)
The median performance was pretty good, but it had some awful occasional bounces.