Cannot Get Radio to Communicate.

GoogleCodeExporter commented 9 years ago

Hello and am a Beginner to JDrones QuadCopters and would really appreciate some 
help.

1.Powered on my QuadCopter Kit and Transmitter and Lights blink. Followed the 
guide on how to bind the Transmitter to Reciever and Green LED was set on the 
Transmitter at the end of procedure. But ESC have no motion.
2. Connected it on Mission Planner and when i go to Radio Calibration i see 
movement happening there when i move the sticks. Also sometimes when i do this 
step the motors rotate at full speed and moving the sticks have no control over 
it. 
3. Followed the wiki guide on how to calibrate the ESC's and they dont seem to 
work. 

What version of the product are you using? On what operating system?
JDRONES ArduCopter Quad v1.1 Assembled, Radio 9ch Wfly-WFt09 and Mission 
Planner installed on Windows 7.

Is there any Guide on calibration or how to setup from start please do provide 
links so i can check everything from scratch.

Original issue reported on code.google.com by preetham...@gmail.com on 21 Dec 2012 at 3:06

GoogleCodeExporter commented 9 years ago

Hello,
Could anybody please shed some light on the situation mentioned above.???

Regards,
Preetham.

Original comment by preetham...@gmail.com on 4 Jan 2013 at 6:18

GoogleCodeExporter commented 9 years ago

Closing all issues on the old issues list by marking them WontFix.

If this is still a valid issue please re-raise it on the new GitHub issues 
list: https://github.com/diydrones/ardupilot/issues

Thanks!

Original comment by rmackay...@gmail.com on 21 Jul 2013 at 2:14

Changed state: WontFix

adibpriatama / arducopter

Cannot Get Radio to Communicate. #532