search

adonno / tagreader

Simple to build/use NFC tag reader, specially created for Home Assistant
https://adonno.com
GNU General Public License v3.0
1.22k stars 186 forks source link

Piezo buzzer volume is too low | INFO #74

Closed CarpeDiemRo closed 4 years ago

CarpeDiemRo commented 4 years ago

There is any possibility to increase the volume of the piezo buzzer?

RichieFrame commented 4 years ago

I am using an actively powered passive buzzer, it takes constant 3.3v input plus the 3,3v trigger from the ESP GPIO... it is quite loud. You can even add a potentiometer to the ground for a volume knob, I am using a 470ohm resistor to get appropriate volume for an open air design

CarpeDiemRo commented 4 years ago

I am using an actively powered passive buzzer, it takes constant 3.3v input plus the 3,3v trigger from the ESP GPIO... it is quite loud. You can even add a potentiometer to the ground for a volume knob, I am using a 470ohm resistor to get appropriate volume for an open air design

I have an active buzzer, too and it works perfectly. The major problem is that is too big and doesn't fit into adonno box.

adonno commented 4 years ago

there is someone who drilled a hole in the case to fit the Buzzer , unfortunately considering that we wanted to have a slim design we had to revert to this buzzer. Function follows form :-D