apply it in version specific u-boot_2023.10.bbappend so that if someone already uses newer version backported to nanbield it won't cause do_patch failure
instead of:
U-Boot 2023.10 (Oct 02 2023 - 14:39:59 +0000)
DRAM: 948 MiB (effective 3.9 GiB) RPI 4 Model B (0xc03111) Core: 212 devices, 16 uclasses, devicetree: board
MMC: mmcnr@7e300000: 1, mmc@7e340000: 0
Loading Environment from FAT... OK
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
bcmgenet: PHY startup failed: -110
ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
bcmgenet: PHY startup failed: -110
it boots automatically
U-Boot 2023.10 (Oct 02 2023 - 14:39:59 +0000)
DRAM: 948 MiB (effective 3.9 GiB) RPI 4 Model B (0xc03111) Core: 212 devices, 16 uclasses, devicetree: board
MMC: mmcnr@7e300000: 1, mmc@7e340000: 0
Loading Environment from FAT... OK
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
** Booting bootflow 'mmc@7e340000.bootdev.part_1' with script
Working FDT set to 2eff2300
25268736 bytes read in 1099 ms (21.9 MiB/s)
Moving Image from 0x80000 to 0x200000, end=1b30000
## Flattened Device Tree blob at 2eff2300
Booting using the fdt blob at 0x2eff2300
Working FDT set to 2eff2300
Using Device Tree in place at 000000002eff2300, end 000000002f002f69
Working FDT set to 2eff2300
Starting kernel ...
fixes: https://github.com/agherzan/meta-raspberrypi/issues/1338
apply it in version specific u-boot_2023.10.bbappend so that if someone already uses newer version backported to nanbield it won't cause do_patch failure
instead of:
it boots automatically