Description
Building the rpi-test-image or core-image-base with poky as the distro seems to result in an unbootable image for me on a Raspberry Pi Zero W (1st Gen). The ACT LED will flicker a few times before ending up staying a solid green. Connecting a UART probe to GPIO with the Raspberry Pi Debug Probe shows it getting stuck around 9 seconds into the kernel boot process.
The last thing it outputs before locking up is Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.bin failed with error -2
Steps to reproduce the issue:
Build a Raspberry Pi Zero W image with the machine raspberrypi0-wifi, with distro poky and either target core-image-base or rpi-test-image (In both instances I used kas)
Flash the resulting rpi-sdimg file to an SD Card
Boot Raspberry Pi Zero W with UART probes attached and watch it freeze around 9s in.
Describe the results you received:
The image fails to finish booting.
Describe the results you expected:
The kernel to boot completely, and land me at the tty login screen.
Additional information you deem important (e.g. issue happens only occasionally):
I have attempted with both kirkstone and scarthgap branches of the repos, and neither made a difference.
Description Building the rpi-test-image or core-image-base with poky as the distro seems to result in an unbootable image for me on a Raspberry Pi Zero W (1st Gen). The ACT LED will flicker a few times before ending up staying a solid green. Connecting a UART probe to GPIO with the Raspberry Pi Debug Probe shows it getting stuck around 9 seconds into the kernel boot process.
Screen output: https://pastebin.com/Z3aBcDLb
The last thing it outputs before locking up is
Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.bin failed with error -2
Steps to reproduce the issue:
raspberrypi0-wifi
, with distropoky
and either targetcore-image-base
orrpi-test-image
(In both instances I used kas)Describe the results you received: The image fails to finish booting.
Describe the results you expected: The kernel to boot completely, and land me at the tty login screen.
Additional information you deem important (e.g. issue happens only occasionally): I have attempted with both kirkstone and scarthgap branches of the repos, and neither made a difference.
Kas YML file:
Additional details (revisions used, host distro, etc.): Ubuntu 23.10 Kas 4.2