search

ahodges9 / LedFx

LedFx is a network based LED effect controller with support for advanced real-time audio effects! LedFx can control multiple devices and works great with cheap ESP8266 nodes allowing for cost effectvice syncronized effects across your entire house!
MIT License
384 stars 91 forks source link

Insructions with Raspberry Pi? #118

Open Andriejus opened 4 years ago

Andriejus commented 4 years ago

Hi. Can anyone explain how to get everything working with Raspberry Pi? I dont want to use my computer with anaconda.. Which model Raspberry should I buy? Im planing to get sound signal from my stereo amplifier, so should I buy also some kind of USB sound card (can you recommend something)? Maybe there are some detailed instructions how to do everything? Now I just want to know what kind of equipment should I buy? I have LED strips, power supply etc. (I already did it with anaconda+computer) and now I want a stand alone Raspberry!

not-matt commented 4 years ago

https://github.com/ahodges9/LedFx/issues/62

Check this out if you haven't already

Andriejus commented 4 years ago

62

Check this out if you haven't already

I have checked, but mostly they are talking about programming:) First I need to know what hardware I should buy and then I can dive into programming. So what I need in between my LED strip and stereo amplifier with L/R AUDIO LINE-outs?:)

not-matt commented 4 years ago

Aye gotcha. I'd get a raspberry pi 3b+ or newer, 4 would be ideal. Not sure if the 4 has better sound card, but the 3b+ also needs a usb sound card for line in.

You could send the audio line to the pi before amplification, perhaps using a simple splitter.

On Wed, 1 Jul 2020, 16:27 Andriejus, notifications@github.com wrote:

62 https://github.com/ahodges9/LedFx/issues/62

Check this out if you haven't already

I have checked, but mostly they are talking about programming:) First I need to know what hardware I should buy and then I can dive into programming. So what I need in between my LED strip and stereo amplifier with L/R AUDIO LINE-outs?:)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ahodges9/LedFx/issues/118#issuecomment-652486602, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHXFVTAT774BXBEOH7UYDM3RZNIWDANCNFSM4ONPLN5Q .

kapoorshivam100 commented 3 years ago

The instructions for linux and works with raspberry pi 4 (buster). Works great for me Also use WLED for the led interfacing . would be easy