-- Logs begin at Sun 2018-01-28 07:58:17 PST, end at Sun 2021-01-31 09:40:28 PST. --
Jan 31 06:38:19 jetson-4-3 systemd[1]: Started Argus daemon.
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: === NVIDIA Libargus Camera Service (0.97.3)=== Listening for connections...=== gst-launch-1.0[26386]: Connection established (7F83CEF1D0)OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module1
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: OFParserGetVirtualDevice: NVIDIA Camera virtual enumerator not found in proc device-tree
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ----
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: LSC: LSC surface is not based on full res!
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ----
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: V4L2Device not available (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function findDevice(), line 256)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: (propagating from /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function initialize(), line 60)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvOdmDevice) Error ModuleNotPresent: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function initialize(), line 106)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclDriverInitializeData: Unable to initialize driver v4l2_sensor
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclInitializeDrivers: error: Failed to init camera sub module v4l2_sensor
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclStartPlatformDrivers: Failed to start module drivers
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclStateControllerOpen: Failed ImagerGUID 0. (error 0xA000E)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclOpen: PCL Open Failed. Error: 0xf
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: Sensor could not be opened. (in src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 582)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureService.cpp, function addSourceByGuid(), line 437)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function addSourceByIndex(), line 295)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function getSource(), line 458)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: Acquiring SCF Camera device source via index 1 has failed. ---- imager: No override file found. ----
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: initializeDevNode: Failed to open dev node '/dev/camera/video1'; No such file or directory, trying alternate default location
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureServiceDeviceSensor.cpp, function open(), line 139)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 579)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureService.cpp, function addSourceByGuid(), line 437)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function addSourceByIndex(), line 295)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function getSource(), line 458)
Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: Acquiring SCF Camera device source via index 2 has failed. === gst-launch-1.0[26386]: CameraProvider initialized (0x7f7c843ac0)LSC: LSC surface is not based on full res!
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: === gst-launch-1.0[26386]: CameraProvider destroyed (0x7f7c843ac0)=== gst-launch-1.0[26386]: Connection closed (7F83CEF1D0)=== gst-launch-1.0[26386]: Connection cleaned up (7F83CEF1D0)=== python[27965]: Connection established (7F83CEF1D0)OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module1
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: OFParserGetVirtualDevice: NVIDIA Camera virtual enumerator not found in proc device-tree
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ----
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: LSC: LSC surface is not based on full res!
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ----
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: V4L2Device not available (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function findDevice(), line 256)
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: (propagating from /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function initialize(), line 60)
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvOdmDevice) Error ModuleNotPresent: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function initialize(), line 106)
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclDriverInitializeData: Unable to initialize driver v4l2_sensor
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclInitializeDrivers: error: Failed to init camera sub module v4l2_sensor
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclStartPlatformDrivers: Failed to start module drivers
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclStateControllerOpen: Failed ImagerGUID 0. (error 0xA000E)
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclOpen: PCL Open Failed. Error: 0xf
Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: Sensor could not be opened. (in src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 582)
"nvargus_log.txt" 218L, 34252C
-- Logs begin at Sun 2018-01-28 07:58:17 PST, end at Sun 2021-01-31 09:40:28 PST. -- Jan 31 06:38:19 jetson-4-3 systemd[1]: Started Argus daemon. Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: === NVIDIA Libargus Camera Service (0.97.3)=== Listening for connections...=== gst-launch-1.0[26386]: Connection established (7F83CEF1D0)OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0 Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module1 Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: OFParserGetVirtualDevice: NVIDIA Camera virtual enumerator not found in proc device-tree Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ---- Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: LSC: LSC surface is not based on full res! Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ---- Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: V4L2Device not available (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function findDevice(), line 256) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: (propagating from /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function initialize(), line 60) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: (NvOdmDevice) Error ModuleNotPresent: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function initialize(), line 106) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclDriverInitializeData: Unable to initialize driver v4l2_sensor Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclInitializeDrivers: error: Failed to init camera sub module v4l2_sensor Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclStartPlatformDrivers: Failed to start module drivers Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclStateControllerOpen: Failed ImagerGUID 0. (error 0xA000E) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: NvPclOpen: PCL Open Failed. Error: 0xf Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: Sensor could not be opened. (in src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 582) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureService.cpp, function addSourceByGuid(), line 437) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function addSourceByIndex(), line 295) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function getSource(), line 458) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: Acquiring SCF Camera device source via index 1 has failed. ---- imager: No override file found. ---- Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: initializeDevNode: Failed to open dev node '/dev/camera/video1'; No such file or directory, trying alternate default location Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureServiceDeviceSensor.cpp, function open(), line 139) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 579) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/services/capture/CaptureService.cpp, function addSourceByGuid(), line 437) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function addSourceByIndex(), line 295) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: (propagating from src/api/CameraDriver.cpp, function getSource(), line 458) Jan 31 08:35:23 jetson-4-3 nvargus-daemon[5472]: Acquiring SCF Camera device source via index 2 has failed. === gst-launch-1.0[26386]: CameraProvider initialized (0x7f7c843ac0)LSC: LSC surface is not based on full res! Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: === gst-launch-1.0[26386]: CameraProvider destroyed (0x7f7c843ac0)=== gst-launch-1.0[26386]: Connection closed (7F83CEF1D0)=== gst-launch-1.0[26386]: Connection cleaned up (7F83CEF1D0)=== python[27965]: Connection established (7F83CEF1D0)OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0 Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module1 Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: OFParserGetVirtualDevice: NVIDIA Camera virtual enumerator not found in proc device-tree Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ---- Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: LSC: LSC surface is not based on full res! Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: ---- imager: No override file found. ---- Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: V4L2Device not available (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function findDevice(), line 256) Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvCamV4l2) Error ModuleNotPresent: (propagating from /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function initialize(), line 60) Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: (NvOdmDevice) Error ModuleNotPresent: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function initialize(), line 106) Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclDriverInitializeData: Unable to initialize driver v4l2_sensor Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclInitializeDrivers: error: Failed to init camera sub module v4l2_sensor Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclStartPlatformDrivers: Failed to start module drivers Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclStateControllerOpen: Failed ImagerGUID 0. (error 0xA000E) Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: NvPclOpen: PCL Open Failed. Error: 0xf Jan 31 08:37:19 jetson-4-3 nvargus-daemon[5472]: SCF: Error BadParameter: Sensor could not be opened. (in src/services/capture/CaptureServiceDeviceSensor.cpp, function getSourceFromGuid(), line 582) "nvargus_log.txt" 218L, 34252C