Open KES777 opened 10 months ago
$ sudo lshw -C network
[sudo] password for kes:
*-network
description: Ethernet interface
product: Ethernet Connection (17) I219-V
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
logical name: eno1
version: 11
serial: 50:eb:f6:2a:f8:11
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=6.2.5-060205-generic firmware=2.3-4 latency=0 link=no multicast=yes port=twisted pair
resources: irq:145 memory:84b00000-84b1ffff
*-network
description: Wireless interface
physical id: 8
bus info: usb@1:1
logical name: enx08beac187b82
serial: 08:be:ac:18:7b:82
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8812au driverversion=6.2.5-060205-generic multicast=yes wireless=unassociated
@KES777 I had this issue just a bit ago on 6.1.0; I resolved it by installing libelf-dev, recompiling, and reloading the 88XXau module.
@2l47 I have installed libelf-dev
. I tried recompiling and installing once more without success. I can see TP-Link-5G network, I can connect to it and work. I do not see 5G network only from DIR-822.
I'm also having the same issue, and the weird part is that it seems that I can see them, but I can't get their SSID correctly, so I can't connect to them. When I run nmcli dev wifi list
, this is the output (changed the BSSID just a bit):
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
4A:22:54:XX:XX:FD -- Infra 6 270 Mbit/s 100 ▂▄▆█ WPA2
* 48:22:54:XX:XX:FD TP-Link_37D8 Infra 6 270 Mbit/s 100 ▂▄▆█ WPA2
EE:50:8B:XX:XX:D8 -- Infra 6 270 Mbit/s 100 ▂▄▆█ WPA2
5C:62:8B:XX:XX:D8 TP-Link_37D8 Infra 6 270 Mbit/s 100 ▂▄▆█ WPA2
EE:40:8B:XX:XX:D8 -- Infra 6 270 Mbit/s 97 ▂▄▆█ WPA2
48:22:54:XX:XX:60 TP-Link_37D8_2.4G_EXT Infra 6 270 Mbit/s 54 ▂▄__ WPA2
This is the sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0f0
version: 0e
serial: 6c:4b:90:15:31:6a
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=6.2.0-39-generic latency=0 link=no multicast=yes port=twisted pair
resources: irq:32 ioport:ec00(size=256) memory:fea18000-fea18fff memory:fea10000-fea13fff
*-network
description: Wireless interface
physical id: 4
bus info: usb@2:3
logical name: wlx30de4bc5e761
serial: 30:de:4b:c5:e7:61
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl88XXau driverversion=6.2.0-39-generic ip=192.168.2.157 multicast=yes wireless=IEEE 802.11bgn
I tried to search 5G network, but only 2G available.
Which and how I can provide more debug information to resolve this issue? Thank you.