search

aircrack-ng / rtl8812au

RTL8812AU/21AU and RTL8814AU driver with monitor mode and frame injection
GNU General Public License v2.0
3.51k stars 767 forks source link

Monitor mode not working in awsu036ach #1173

Open ROoTCo4e opened 3 months ago

ROoTCo4e commented 3 months ago

when i type this command sudo iw dev wlan0 set type monitor
it replies > command failed: Operation not supported (-95)

i have also try many other ways but i could not able to make it working note: i have install this driver successfully without any error and i can use it as a reciver but cant perform monitor mode and packet injection

plzzz help me

Heyholiday067 commented 3 months ago

There is a bug in recent update. Use my old fork and it work (i update it before the commit brought the bug) https://github.com/Heyholiday067/rtl8812au

ROoTCo4e commented 3 months ago

There is a bug in recent update. Use my old fork and it work (i update it before the commit brought the bug) https://github.com/Heyholiday067/rtl8812au

still not working brother .... please help me ^._.^

Heyholiday067 commented 3 months ago

Run uname -a to show the current kernel version! I remember the kernel > 6.9 will meet some bug but i still dont figure it out.So i downgrade my kali to 6.3.0 and everything works ! (6.8.x might work,you can test various kernel)

kazundo commented 3 months ago

https://github.com/Heyholiday067/rtl8812au is work me with the new kernel kali thanks

gabrielhhz135 commented 3 months ago

https://github.com/Heyholiday067/rtl8812au is work me with the new kernel kali thanks

How you install new kernel, i also instal new kernel 6.8 but also not working

Heyholiday067 commented 3 months ago

Well...i felt confused now. But you can follow this steps

1.run lsmod to check the driver is loaded or not

  1. run iwconfig to check whether the usb adapter is identified correctly 3.run airmon-ng check kill to kill the processes that will interfere the interface 4.run aireplay-ng -9 wlan0 to test the adapter can inject info into packet 5.use dmesg to output the kernel log and paste here.
gabrielhhz135 commented 3 months ago

Monitor mode working, but when i type command like airodump-ng wlan0 , it is not working and mdk4 and 3 not working

gabrielhhz135 commented 3 months ago

Well...i felt confused now. But you can follow this steps

1.run lsmod to check the driver is loaded or not 2. run iwconfig to check whether the usb adapter is identified correctly 3.run airmon-ng check kill to kill the processes that will interfere the interface 4.run aireplay-ng -9 wlan0 to test the adapter can inject info into packet 5.use dmesg to output the kernel log and paste here.

And how i can downgrade kali linux kernel and donrt update it but udate OS, vmware also not working

Heyholiday067 commented 2 months ago

Well...i felt confused now. But you can follow this steps 1.run lsmod to check the driver is loaded or not 2. run iwconfig to check whether the usb adapter is identified correctly 3.run airmon-ng check kill to kill the processes that will interfere the interface 4.run aireplay-ng -9 wlan0 to test the adapter can inject info into packet 5.use dmesg to output the kernel log and paste here.

And how i can downgrade kali linux kernel and donrt update it but udate OS, vmware also not working

It is always not suggested to use vmware or virtualbox.Use real pc instead.

Heyholiday067 commented 2 months ago

Well...i felt confused now. But you can follow this steps 1.run lsmod to check the driver is loaded or not 2. run iwconfig to check whether the usb adapter is identified correctly 3.run airmon-ng check kill to kill the processes that will interfere the interface 4.run aireplay-ng -9 wlan0 to test the adapter can inject info into packet 5.use dmesg to output the kernel log and paste here.

And how i can downgrade kali linux kernel and donrt update it but udate OS, vmware also not working

By the way,you didnt provide any error log or kernel log , how people can help you ?

kazundo commented 2 months ago

Monitor mode working, but when i type command like airodump-ng wlan0 , it is not working and mdk4 and 3 not working

me i work for me on vmware fusion 13 pro before install the driver
remove all driver rtl88xx ;;;

ka3boosh commented 2 months ago

i cant get it to work at VMware workstation I'm using kali 2024.2 I try everything i seen here or on other forums cant get it to work i always end up with error

mariusmoo commented 2 months ago

I can currently reproduce the same problem that Heyholiday067 mentions.

Hardware: Raspberry Pi 4

uname -a: Linux rpi4 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux

atommo999 commented 2 months ago

I've got the same issue- tried Heyholiday067's fork but still the same problem. It can see the adapter when doing an iwconfig, but if you set it to monitor mode and do an airodump-ng with it, no networks are detected.

It is also unusable in normal 'managed' mode either (essentially 'lights on, but no one home').

I am running the arm64 Kali release, fully up to date on a physical laptop- not virtual.

ka3boosh commented 2 months ago

I fix the issue on kali 2024.2 It was easy and no errors I'll update my post soon

atommo999 commented 2 months ago

I've ended up buying a different adapter instead now, an AWUS036ACS.

If anyone wants more info on the issue with the ACH though, I can do more tests with it if it helps sort the problem. Just let me know what commands I should try.

ka3boosh commented 2 months ago

I've ended up buying a different adapter instead now, an AWUS036ACS.

If anyone wants more info on the issue with the ACH though, I can do more tests with it if it helps sort the problem. Just let me know what commands I should try.

If u wait just a little bit more, here is the fix i uploaded a video with the right driver, it was an easy fix

https://youtu.be/Yr-8RmoNi70?si=-VGorwjSUVloLPLm

atommo999 commented 2 months ago

I've ended up buying a different adapter instead now, an AWUS036ACS. If anyone wants more info on the issue with the ACH though, I can do more tests with it if it helps sort the problem. Just let me know what commands I should try.

If u wait just a little bit more, here is the fix i uploaded a video with the right driver, it was an easy fix

https://youtu.be/Yr-8RmoNi70?si=-VGorwjSUVloLPLm

Thanks for your efforts- I have just tried (using the Plasma desktop environment with my Kali) and since doing those steps, I cannot load into the desktop environment.

Straight after rebooting it was much slower to load the login screen, and after logging in it is just stuck with a cursor on a black screen.

I can only imagine the driver has caused some sort of fundamental instability.

It is hard to say whether the problem is related to using Plasma rather than Xfce, or because I am running this on a physical machine rather than virtual.

Others may be able to clarify this with their own tests.

CursedOddity commented 2 weeks ago

There is a bug in recent update. Use my old fork and it work (i update it before the commit brought the bug) https://github.com/Heyholiday067/rtl8812au

Dude.... THANK YOU.

I'm not sure if its from upgrading to 6.10.9 or your fork but i finally have my AWUS036ACH working again on kali 2024.3 with kernel 6.10.9 with your fork. Everything works again. THANK YOU!

I was trying to get this to work for over a month.