Open volthor71 opened 4 years ago
I have been using this driver with kernel 5.4 and have seen no issues, Distributions that use kernel 5.4 currently are Ubuntu 18.04 and 20.04 as well as Linux Mint 19.3 and 20.
I had the same problem with 5.6.4.2, if you try 5.7.0 it could work.
anyone found the solution?
Which chipset is in the adapter you are using?
Post the results of:
$ lsusb
@morrownr Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 002: ID 093a:2533 Pixart Imaging, Inc. Gaming Mouse Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver Bus 003 Device 002: ID 0c76:161f JMTek, LLC. USB PnP Audio Device Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0bda:818b Realtek Semiconductor Corp. RTL8192EU 802.11b/g/n WLAN Adapter Bus 001 Device 002: ID 2357:011e TP-Link 802.11ac WLAN Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2357:011e TP-Link 802.11ac WLAN Adapter
Your chipset is rtl8811au. Try the following driver:
@morrownr didn't work bro i'm using Linux Mint 20.3
Hi
I want to install the rtl8812au git to run a TP wifi key Link AC600 Archer T2U
I'm on LinuxMint 18.3 and i have error when i install rtl8812au with kernel 5.7.9
Here is the return of the code :
`~/rtl8812au $ sudo ./dkms-install.sh About to run dkms install steps...
Creating symlink /var/lib/dkms/rtl8812au/5.6.4.2/source -> /usr/src/rtl8812au-5.6.4.2
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area.... 'make' -j4 KVER=5.7.9 KSRC=/lib/modules/5.7.9/build....(bad exit status: 2) ERROR (dkms apport): binary package for rtl8812au: 5.6.4.2 not found Error! Bad return status for module build on kernel: 5.7.9 (x86_64) Consult /var/lib/dkms/rtl8812au/5.6.4.2/build/make.log for more information.
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area.... 'make' -j4 KVER=5.7.9 KSRC=/lib/modules/5.7.9/build....(bad exit status: 2) ERROR (dkms apport): binary package for rtl8812au: 5.6.4.2 not found Error! Bad return status for module build on kernel: 5.7.9 (x86_64) Consult /var/lib/dkms/rtl8812au/5.6.4.2/build/make.log for more information. Finished running dkms install steps. `
What version of kernel do i have to install for don't have this error ? Do i have to install kernel 5.6.4.2 ? Or a higher version ? Or a lower version
Thanks in advance
PS: Sorry for my bad english, i'm french