search

airgradienthq / arduino

Firmware of open-source hardware air quality monitors AirGradient ONE (indoor) and AirGradient Open Air (outdoor).
https://www.airgradient.com/documentation/
Other
218 stars 115 forks source link

LED inconsistency | Firmware v. 3.1.1 #161

Closed yegormk closed 1 month ago

yegormk commented 5 months ago

I've noticed some issues with the LED bar: The pictures might not be very clear, but you can see green lights on the first and last LED lights, and in the middle, they are all yellow. Maybe all LEDs should be yellow and not: "green | yellow | yellow | yellow | green" ?

Ticket1 Ticket2

There also could be some issues on other levels.

pnt325 commented 5 months ago

@yegormk As for your CO2 value and number of LED is turn off the LED color should be Organge

yegormk commented 5 months ago

@pnt325 Yes, that is correct. But the colors on the first and last LEDs lamps are Green and not Orange. Maybe these two also should be Orange?

pnt325 commented 5 months ago

@pnt325 Yes, that is correct. But the colors on the first and last LEDs lamps are Green and not Orange. Maybe these two also should be Orange?

Thank for your report. I'll check it.

airgradienthq commented 4 months ago

@yegormk Could you please check if that issue still exists with fw 3.1.4?

yegormk commented 4 months ago

@airgradienthq @pnt325 Issue is still there image image

I have Firmware version 3.1.4: image

Could you please check on your devices?

pnt325 commented 4 months ago

hi @yegormk Thank for your detail report. I have update color code #196 it look better now.