Open Hardware Monitor Connection

akej74 / grid-control

Grid Control is a free and open source alternative to the CAM application from NZXT

GNU General Public License v3.0

147 stars 31 forks source link

Open Hardware Monitor Connection #8

Closed kiltedpiper closed 7 years ago

kiltedpiper commented 7 years ago

Hi! Thank you for this, I was having the CAM game crashing issues. I am not able to get the Grid-Control to connect to Open Hardware, the status is 3 red lines. I have tried starting OHM first and second, and have them both set to run as Admin mode. Do they need to be in the same folder or anything like that? Thanks!!

kiltedpiper commented 7 years ago

Well, figured that one out :) I needed to assign the CPU and GPU monitor set up in the sensors, then it worked.

akej74 commented 7 years ago

Thanks for your comment, maybe I should add some info about that in the application, or change the logic to make it more user friendly.

oje011 commented 7 years ago

You should specify that you are checking for that exact OpenHardwareMonitor version. I tried using the existing one I had, but it didn't show up anywhere. It worked when using the version you linked to.

Thanks for an awesome tool. Really loving the config and the lightweight operation.

akej74 commented 7 years ago

Updated Readme as follows:

Info that you need to configure sensors; before that is done you will get the "Check that OHM is running" warning message
Added link to latest OHM beta (tested and works OK)