Closed iHD992 closed 6 years ago
What does "dmesg" say after you install the module? What about "modprobe"?
What about "modprobe"?
According to your tutorial on hackaday I expect some response. "If the ESP8089/8266 is found, you should see these lines spread through dmesg: [...]"
What does "dmesg" say after you install the module?
`Linux raspberrypi 4.9.59+ #1047 Sun Oct 29 11:47:10 GMT 2017 armv6l
The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Feb 4 17:45:30 2018 pi@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.59+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1047 Sun Oct 29 11:47:10 GMT 2017 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt:Machine model: Raspberry Pi Zero Rev 1.3 [ 0.000000] cma: Reserved 8 MiB at 0x17400000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 98304 [ 0.000000] free_area_init_node: node 0, pgdat c0914e10, node_mem_map d7c8bd00 [ 0.000000] Normal zone: 864 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 98304 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97440 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=b5f06117-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 370984K/393216K available (5950K kernel code, 491K rwdata, 1948K rodata, 396K init, 725K bss, 14040K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd8800000 - 0xff800000 ( 624 MB) lowmem : 0xc0000000 - 0xd8000000 ( 384 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc05d7a48 (5951 kB) .init : 0xc0841000 - 0xc08a4000 ( 396 kB) .data : 0xc08a4000 - 0xc091ef48 ( 492 kB) .bss : 0xc091ef48 - 0xc09d4648 ( 726 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000032] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000064] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000155] bcm2835: system timer (irq = 27) [ 0.000616] Console: colour dummy device 80x30 [ 0.000641] console [tty1] enabled [ 0.000666] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) [ 0.060317] pid_max: default: 32768 minimum: 301 [ 0.060747] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060764] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.062010] Disabling memory control group subsystem [ 0.062147] CPU: Testing write buffer coherency: ok [ 0.062202] ftrace: allocating 21715 entries in 64 pages [ 0.180534] Setting up static identity map for 0x8200 - 0x8238 [ 0.182511] devtmpfs: initialized [ 0.192284] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.192710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.192737] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.194023] pinctrl core: initialized pinctrl subsystem [ 0.195460] NET: Registered protocol family 16 [ 0.197974] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.207629] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.207645] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.207748] Serial: AMBA PL011 UART driver [ 0.210658] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.261528] bcm2835-dma 20007000.dma: DMA legacy API manager at d880d000, dmachans=0x1 [ 0.264186] SCSI subsystem initialized [ 0.264446] usbcore: registered new interface driver usbfs [ 0.264567] usbcore: registered new interface driver hub [ 0.264781] usbcore: registered new device driver usb [ 0.270606] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:13 [ 0.272582] clocksource: Switched to clocksource timer [ 0.326729] VFS: Disk quotas dquot_6.6.0 [ 0.326851] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.327174] FS-Cache: Loaded [ 0.327524] CacheFiles: Loaded [ 0.346930] NET: Registered protocol family 2 [ 0.348281] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.348371] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.348466] TCP: Hash tables configured (established 4096 bind 4096) [ 0.348566] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.348593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.348903] NET: Registered protocol family 1 [ 0.349654] RPC: Registered named UNIX socket transport module. [ 0.349666] RPC: Registered udp transport module. [ 0.349670] RPC: Registered tcp transport module. [ 0.349675] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.350901] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available [ 0.353462] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.374129] FS-Cache: Netfs 'nfs' registered for caching [ 0.375881] NFS: Registering the id_resolver key type [ 0.375927] Key type id_resolver registered [ 0.375933] Key type id_legacy registered [ 0.380420] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.380785] io scheduler noop registered [ 0.380798] io scheduler deadline registered (default) [ 0.381247] io scheduler cfq registered [ 0.387243] BCM2708FB: allocated DMA memory 57500000 [ 0.387304] BCM2708FB: allocated DMA channel 0 @ d880d000 [ 0.440845] Console: switching to colour frame buffer device 240x67 [ 0.483880] bcm2835-rng 20104000.rng: hwrng registered [ 0.484076] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 0.485178] vc-sm: Videocore shared memory driver [ 0.513396] brd: module loaded [ 0.527546] loop: module loaded [ 0.527572] Loading iSCSI transport class v2.0-870. [ 0.528593] usbcore: registered new interface driver smsc95xx [ 0.528626] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.757200] Core Release: 2.80a [ 0.757221] Setting default values for core params [ 0.757266] Finished setting default values for core params [ 0.957884] Using Buffer DMA mode [ 0.957899] Periodic Transfer Interrupt Enhancement - disabled [ 0.957904] Multiprocessor Interrupt Enhancement - disabled [ 0.957917] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.958021] Dedicated Tx FIFOs mode [ 0.958705] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xd7514000 dma = 0x57514000 len=9024 [ 0.958742] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.958755] dwc_otg: Microframe scheduler enabled [ 0.958853] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc0451694 [ 0.958868] WARN::hcd_init_fiq:460: FIQ ASM at 0xc0451970 length 36 [ 0.958898] WARN::hcd_init_fiq:486: MPHI regs_base at 0xd88a5000 [ 0.958984] dwc_otg 20980000.usb: DWC OTG Controller [ 0.959057] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 0.959201] dwc_otg 20980000.usb: irq 56, io mem 0x00000000 [ 0.959262] Init: Port Power? op_state=1 [ 0.959268] Init: Power Port (0) [ 0.959698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.959719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.959731] usb usb1: Product: DWC OTG Controller [ 0.959740] usb usb1: Manufacturer: Linux 4.9.59+ dwc_otg_hcd [ 0.959751] usb usb1: SerialNumber: 20980000.usb [ 0.961085] hub 1-0:1.0: USB hub found [ 0.961188] hub 1-0:1.0: 1 port detected [ 0.962297] dwc_otg: FIQ enabled [ 0.962309] dwc_otg: NAK holdoff enabled [ 0.962315] dwc_otg: FIQ split-transaction FSM enabled [ 0.962340] Module dwc_common_port init [ 0.963047] usbcore: registered new interface driver usb-storage [ 0.963579] mousedev: PS/2 mouse device common for all mice [ 0.965410] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.965960] bcm2835-cpufreq: min=700000 max=1000000 [ 0.966685] sdhci: Secure Digital Host Controller Interface driver [ 0.966697] sdhci: Copyright(c) Pierre Ossman [ 0.967224] sdhost-bcm2835 20202000.sdhost: could not get clk, deferring probe [ 0.969708] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe [ 0.969901] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.970731] ledtrig-cpu: registered to indicate activity on CPUs [ 0.970983] hidraw: raw HID events driver (C) Jiri Kosina [ 0.971294] usbcore: registered new interface driver usbhid [ 0.971303] usbhid: USB HID core driver [ 0.972831] vchiq: vchiq_init_state: slot_zero = 0xd7580000, is_master = 0
[ 0.985986] [vc_sm_connected_init]: end - returning 0
[ 0.986539] Initializing XFRM netlink socket
[ 0.986586] NET: Registered protocol family 17
[ 0.986771] Key type dns_resolver registered
[ 0.988845] registered taskstats version 1
[ 0.997195] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.997351] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.997466] console [ttyAMA0] enabled
[ 1.000230] sdhost: log_buf @ d7513000 (57513000)
[ 1.072680] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.075299] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.075318] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.106135] random: fast init done
[ 1.150109] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.152223] mmc0: new high speed SDHC card at address b368
[ 1.152833] of_cfs_init
[ 1.152997] of_cfs_init: OK
[ 1.153960] Waiting for root device PARTUUID=b5f06117-02...
[ 1.156424] mmcblk0: mmc0:b368 USD 14.9 GiB
[ 1.164577] mmcblk0: p1 p2
[ 1.172956] Indeed it is in host mode hprt0 = 00021501
[ 1.238700] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
[ 1.247191] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
[ 1.250892] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
[ 1.255478] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
[ 1.255661] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
[ 1.255827] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
[ 1.255930] mmc1: new high speed SDIO card at address 0001
[ 1.289351] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.289477] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.290894] devtmpfs: mounted
[ 1.292444] Freeing unused kernel memory: 396K
[ 1.292452] This architecture does not have kernel memory protection.
[ 1.372793] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.373367] Indeed it is in host mode hprt0 = 00001101
[ 1.603915] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179
[ 1.603942] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.603951] usb 1-1: Product: 802.11n NIC
[ 1.603963] usb 1-1: Manufacturer: Realtek
[ 1.603974] usb 1-1: SerialNumber: 0092D0011D92
[ 1.929074] systemd[1]: System time before build time, advancing clock.
[ 2.086412] NET: Registered protocol family 10
[ 2.123217] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.168065] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.169588] systemd[1]: Detected architecture arm.
[ 2.171543] systemd[1]: Set hostname to
[ 70.602257] ESP8089 reset via GPIO 0 [ 70.811135] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 70.963279] mmc1: card 0001 removed [ 71.140567] mmc1: queuing unknown CIS tuple 0x01 (3 bytes) [ 71.153936] mmc1: queuing unknown CIS tuple 0x1a (5 bytes) [ 71.160059] mmc1: queuing unknown CIS tuple 0x1b (8 bytes) [ 71.168685] mmc1: queuing unknown CIS tuple 0x80 (1 bytes) [ 71.202809] mmc1: queuing unknown CIS tuple 0x81 (1 bytes) [ 71.203009] mmc1: queuing unknown CIS tuple 0x82 (1 bytes) [ 71.208097] mmc1: new high speed SDIO card at address 0001 [ 71.212889] esp_sdio_dummy_probe enter [ 71.502169] esp_sdio_init power up OK [ 71.591492] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0) [ 71.808219] usbcore: registered new interface driver r8188eu [ 75.428144] esp_host:bdf5087c3deb esp_target: e826c2b3c9fd 57 18202
[ 75.428401] esp_readwrite_file: file /system/lib/modules/test_results filp_open error [ 75.428657] first normal exit [ 75.442857] esp_sdio_remove enter [ 75.442984] sif_disable_irq release irq failed [ 75.563018] eagle_sdio: probe of mmc1:0001:1 failed with error -110 [ 76.403252] mmc1: card 0001 removed [ 76.498055] mmc1: queuing unknown CIS tuple 0x01 (3 bytes) [ 76.507239] mmc1: queuing unknown CIS tuple 0x1a (5 bytes) [ 76.510694] mmc1: queuing unknown CIS tuple 0x1b (8 bytes) [ 76.517473] mmc1: queuing unknown CIS tuple 0x80 (1 bytes) [ 76.517622] mmc1: queuing unknown CIS tuple 0x81 (1 bytes) [ 76.517791] mmc1: queuing unknown CIS tuple 0x82 (1 bytes) [ 76.517879] mmc1: new high speed SDIO card at address 0001 [ 77.807905] esp_host:bdf5087c3deb esp_target: e826c2b3c9fd 57 18202
[ 82.636256] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 83.363530] MAC Address = 00:92:d0:01:1d:92 [ 83.372243] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 85.165120] R8188EU: ERROR assoc success [ 85.175781] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 85.896342] esp_op_add_interface STA [ 85.897149] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 87.136705] wlan1: authenticate with c0:25:06:fc:c2:5e [ 87.137874] wlan1: send auth to c0:25:06:fc:c2:5e (try 1/3) [ 87.146205] wlan1: authenticated [ 87.154408] wlan1: associate with c0:25:06:fc:c2:5e (try 1/3) [ 87.161500] wlan1: RX AssocResp from c0:25:06:fc:c2:5e (capab=0x431 status=0 aid=4) [ 87.161626] wlan1: associated [ 87.162012] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 87.568329] esp_op_ampdu_action RX START c0:25:06:fc:c2:5e tid 0 0 [ 88.968863] start tx ba session,addr:c0:25:06:fc:c2:5e,tid:0 [ 88.970883] esp_op_ampdu_action TX START, addr:c0:25:06:fc:c2:5e,tid:0,state:1 [ 88.975296] esp_op_ampdu_action TX OPERATION, addr:c0:25:06:fc:c2:5e,tid:0,state:2 [ 93.946434] Bluetooth: Core ver 2.22 [ 93.946637] NET: Registered protocol family 31 [ 93.946645] Bluetooth: HCI device and connection manager initialized [ 93.946671] Bluetooth: HCI socket layer initialized [ 93.946687] Bluetooth: L2CAP socket layer initialized [ 93.946779] Bluetooth: SCO socket layer initialized [ 96.669415] fuse init (API version 7.26) pi@raspberrypi:~ $ sudo modprobe esp8089 pi@raspberrypi:~ $ `
Er... I meant to say "lsmod", not "modprobe"
Anyway, it looks like it's working from your dmesg. You won't see any output after "modprobe" unless there is a failure or if you're on a console receiving kernel log messages.
Run "ifconfig" and you should see the esp8266 on the wlan1 interface.
You are right. It works now. Thank You! Maybe the Pi got confused about the two wifis (ESP8266 and USB-Wifi dongle) and was even more confused after I replaced the dongle by the keyboard. Also seems to need some time to connect after reboot.
Had my RPi Zero with Raspbian Jessie running fine with your driver and my ESP8266. I decided to install a fresh Raspbian Stretch (no hardware changes). Everything worked fine until "sudo modprobe esp8089" where just nothing happened:
Same Problem with 1.9.20180103. Any Ideas? I am pretty sure the hardware is ok as it worked with Jessie.