Dashboard Figures

[entopia]

3. Plots of important indicators:

• [x] 2. Temp too hot too cold over past 7 days for 6 locations
• [x] 2.1. Humidity too high over past 7 days for 6 locations
• [x] 1. Vertical stratification (plot time series over past 7 days)
• [ ] 3. Fans (plot time series in kWh for past 7 days, substracting lights) - show vertical line with max
• [ ] Lights (bar plot of estimated hours lights on)
• [ ] Missing data for (1) Energy at CP, (2) Temperature 16B1, (3) R&D area- check sum of datapoints per hour in past month compared with number of hours in past month. Plot 3 horizontal bar charts.

[meljsingh]

The figures attached represent the targeted information portrayed by the figures on the main dashboard (1/2)

1. Temperature too hot/ too cold

source: zensie_trh_data - take hourly average

Presented for 6 locations:

Zone	Sensor data	Too cold	Optimal	Too hot	Target average 24h Temperature
Propagation	1 value	<20	20-25	>25	23
R&D	mean of sensors R&D_1 and R&D_2	<20	20-25	>25	23
Fridge	1 value	<0	0-6	>6	4
Front of farm	sensor 1B2	<18	18-25	>25	21
Middle of farm	mean of sensors 16B1, 16B2, 16B4	<20	20-25	>25	23
Back of farm	sensor 29B2	<20	20-28	>28	25

These values are to be used to create the ranges illustrated in the attached figure

Three key figures:

• Bar chart of temperature within ranges above for past 7 days
• Bar chart of temperature within ranges above for past 24 hours
• Average temperature in past 24 hours (compare with target, ie. 24/23)
• Definition of range

2. Relative Humidity: too dry/ too humid enough

source: zensie_trh_data - take hourly average

Presented for 6 locations:

Zone	Sensor data	Too dry	Optimal	Too humid	Target average 24h RH
Propagation	1 value	<50	50-85	>85	70
R&D	mean of sensors R&D_1 and R&D_2	<50	50-85	>85	70
Fridge	1 value	<50	50-85	>85	70
Front of farm	sensor 1B2	<50	50-85	>85	70
Middle of farm	mean of sensors 16B1, 16B2, 16B4	<50	50-85	>85	70
Back of farm	sensor 29B2	<50	50-85	>85	70

These values are to be used to create the ranges illustrated in the attached figure

Three key figures:

• Bar chart of RH within ranges above for past 7 days
• Bar chart of RH within ranges above for past 24 hours
• Average RH in past 24 hours (compare with target, ie. 72/70)
• Definition of range

3. Vertical stratification

source: zensie_trh_data - take hourly average Simply plot the temperature difference between temperature at 16B4 and 16B1

Indicate final value and range +/- 2degC.

[meljsingh]

4. Energy demand

Ventilation

Fan CC = Fan at Clapham Common, energy from energy_utc, sensor =16

Fan CP = Fan at Carpenter's Place, energy from energy_utc, sensor=17. Calculated by removing light energy use (see warnings for info on how to calculate that)

Time series of hourly energy use (kWh) over past 7 days, with a line indicating max value (30 kWh) with a log scale.

Also indicate average over past 24 hours.

Lights

Lights = From energy at Carpenter's Place, energy from energy_utc, sensor=17. Calculated by using light schedule algorithm (See warnings). Plot of sum of hours lights on per day. With fixed horizonal line at 18.

[rmward61]

Sketch of possible output from GES model