search

alecthegeek / CCHS_Raspian_for_IoT

Scripts and Instructions to get Raspian Linux updated with tools for Internet of Things projects
GNU General Public License v2.0
11 stars 1 forks source link

Script overwrites working WiFi settings with not working ones, despite them being the same #2

Closed roboticistmark closed 11 years ago

roboticistmark commented 11 years ago

Hi there,

I configured my RaspberryPi with 2013-07-26-wheezy-raspbian.img onto a new SD card (freshly wiped)

In order to find the update script I used a Wi-Fi connection setup with WPA2/PSK for my home connection, using the WiFi config on the desktop of the fresh install.

I ran the first script with no issues, the second script asked my to input the wifi details, and I entered the exact same details again. the wifi would not connect after that, and could not be reset using the WiFi config on the desktop, it failed with message (Could not get status from wpa_supplicant). I had to use a wired connection to get the pi back on the network, a few restarts and ran the WiFi Config again, same settings overwritten and it's back working again

Mark

alecthegeek commented 11 years ago

I've justed tested this on the WiFI at HackSpace at it worked fine. Please can you carefully retest and re-open the case if it still fails

Thanks