Sprint Samsung galaxy s3 jelly bean not functioning

[GoogleCodeExporter]

Sprint Samsung galaxy s3 jelly bean build

Latest build

Current

The app does not support any jelly bean ROM for the galaxy s3 

It begins like its going to tether but never releases wifi signal to connect to.

Original issue reported on code.google.com by averymle...@gmail.com on 17 Oct 2012 at 8:49

[GoogleCodeExporter]

JB is on the verge of official release, and I've been running leaked builds for 
about 3 weeks now on my Sprint SGS III (CDMA/LTE).  I really miss Wifi Tether.  
Could this please get a high priority?

Original comment by jim.r...@gmail.com on 24 Oct 2012 at 2:14

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I had added a Issue also before this one was added (issue 1628).  I have the 
same issue with all TW JB Rom leaks for the Sprint Galaxy S3.  Looks like it is 
close to being the final build and release.  Please fix.  I miss my wi-fi 
tether and having to wire tether my phone.  Fix it soon, and I will definitely 
donate to the cause.

Original comment by troydett...@gmail.com on 24 Oct 2012 at 3:18

[GoogleCodeExporter]

You have a good app here but it seams to be broke on my rooted SIII /W 
Jellybean can you please look into this and fix. A LOT of people are 
complaining about this in the Samsung Galaxy SIII forum on XDA.  Thank you.

Original comment by nuclearm...@gmail.com on 24 Oct 2012 at 3:27

[GoogleCodeExporter]

Please add support for JB on GS3. I strictly use my GS3 or internet at home and 
thus can't upgrade to JB unless WiFi Tether works. I would gladly donate to get 
this as it's saving my lots of money per month.

Original comment by tonyar...@gmail.com on 24 Oct 2012 at 3:44

[GoogleCodeExporter]

Please update to support Touchwiz JB on Sprint Galaxy S3.  Thanks for your 
excellent work.

Original comment by clsho...@gmail.com on 24 Oct 2012 at 3:50

[GoogleCodeExporter]

I too would like this to be fixed, Jellybean wifi teather isnt working for me 
either, looks like its going to then never shows up on clients wifi. I tried 
everything to no avail. CM10 however has it works somehow. Please update.

Original comment by stevema...@gmail.com on 24 Oct 2012 at 3:53

[GoogleCodeExporter]

Hoping to see this fixed soon! Using the latest JB leak (LJ7) on my Sprint 
SGSIII andwould llove to be able to use Wifi Tether. 

Original comment by dpj...@gmail.com on 24 Oct 2012 at 3:55

[GoogleCodeExporter]

This is an excellent app and have used it for a year or two. Now that I'm up to 
JB /w TW on Sprint S3 it doesn't work. Would love the addition of this device 
support! Thank you for all you do!

Original comment by markushe...@gmail.com on 24 Oct 2012 at 3:57

[GoogleCodeExporter]

help please. this is the best app for tether. I also have the galaxy s3 from 
sprint.

Original comment by DjElMons...@gmail.com on 24 Oct 2012 at 4:05

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Sprint GSIII - I am running a Touchwiz JB leak.  Please update wifi-tether so 
that I can use on my new phone!

Original comment by BJBes...@gmail.com on 24 Oct 2012 at 4:16

[GoogleCodeExporter]

Please Please Please update this to work!

Original comment by ecarter1...@gmail.com on 24 Oct 2012 at 4:18

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Same here running leaked Jelly Bean on my Sprint S3 and I can't use WiFi tether 
anymore please bump priority.Thank you

Original comment by gtp...@gmail.com on 24 Oct 2012 at 4:46

[GoogleCodeExporter]

Running latest leaked JB build on my Sprint S3...would love to have this great 
app working again!!!!

Original comment by hammer...@gmail.com on 24 Oct 2012 at 4:46

[GoogleCodeExporter]

How can we get this app working for jelly bean. It is an amazing app and 
everybody I know uses it. Jelly bean is the newest release and I hope we can 
get this up to date before it been done somewhere else . Thanks and good luck

Original comment by kdizz...@gmail.com on 25 Oct 2012 at 2:17

[GoogleCodeExporter]

Digging on the S3, the actual wifi driver lives in a separate processor that 
communicates over the DHD bus.  That driver is rejecting all requests to go 
into ad-hoc or infrastructure mode.  The official sprint wifi tether probably 
sends an undocumented secret command to enable the mode - someone who pays the 
$20 legit tethering tax would have to check.  In short, it's a deliberate 
lock-out by sprint to prevent unpaid wifi tethering, and they put more effort 
into it than simply disabling the checkbox.

As an aside, it seems that the official 'wifi direct connect' is also broken on 
the TW JB leak due to this software protection.

Original comment by dan.meri...@gmail.com on 25 Oct 2012 at 8:03

[GoogleCodeExporter]

S3 on sprint with Blazer Rom having same issue.  I can't get any other app to 
work either.  Bollux

Original comment by lvoi...@gmail.com on 25 Oct 2012 at 8:09

[GoogleCodeExporter]

Same here as the others have posted, PLEASE get this fixed so we can tether 
till we are blue in the face!

Original comment by boogaloo...@gmail.com on 25 Oct 2012 at 8:20

[GoogleCodeExporter]

just upgraded my s3 Samsung with official release of jelly beans. awesome 
operating system.  but WiFi tethering stopped working.  in my laptop I get the 
message windows was unable to connect.  tried everything doesn't work.  please 
fix

Original comment by yousif.a...@gmail.com on 25 Oct 2012 at 9:50

[GoogleCodeExporter]

Hey dan.meri...   

Is it possible to pull the old wifi drivers from ICS and insert them in our JB 
Rom and get it working? If so what are the names of the driver files used, and 
I will try replacing them from an a TW ICS Stock ROM driver and see if it runs 
at all.  Just a thought.

Original comment by troydett...@gmail.com on 26 Oct 2012 at 1:09

[GoogleCodeExporter]

troy: Well you can try it with the older firmware (LIF), but the firmware is 
just a pile of binaries labeled "modem.xxx", and grepping for WLAN shows it in 
a number of them.

However, there are reports that people got tethering to work for short periods 
on the LJ7 leak, which would indicate that the required code to change the mode 
to AdHoc is somewhere in the system framework.

Hopefully the fresh source release from Samsung will provide some new answers.

Original comment by dan.meri...@gmail.com on 26 Oct 2012 at 6:15

[GoogleCodeExporter]

I am having the same issue. Excited to resolve this. Will support.

Original comment by olsen....@gmail.com on 28 Oct 2012 at 4:08

[GoogleCodeExporter]

Same problem with the official Jelly Bean on Sprint Galaxy S III. I receive no 
errors on the phone itself, but I'm unable to even find the signal on any other 
device.

Original comment by eric.def...@gmail.com on 28 Oct 2012 at 8:14

[GoogleCodeExporter]

Same here, using FreeGS3 JB release.  Hope this gets fixed soon.

Original comment by jayhuffd...@gmail.com on 29 Oct 2012 at 12:42

[GoogleCodeExporter]

Same here, disappointing how poorly supported this app is now.  No updates 
since August?

Original comment by jwalker55@gmail.com on 29 Oct 2012 at 2:54

[GoogleCodeExporter]

Just want to add myself to the growing list of folks looking to get this 
moving. I'm more than happy to help out with whatever I can. 

Original comment by P.R.Meun...@gmail.com on 29 Oct 2012 at 10:36

[GoogleCodeExporter]

I am having the same issues on the sprint Jellybean rom, WIFI router loads but 
no other devices can find the ssd.  No errors noted

Original comment by daveje...@gmail.com on 30 Oct 2012 at 4:08

[GoogleCodeExporter]

s3 with stock JB Rom on Sprint- same issue

Original comment by Andrew.H...@gmail.com on 30 Oct 2012 at 1:14

[GoogleCodeExporter]

Another request to prioritize resolution for this issue.

Original comment by Brian.B....@gmail.com on 30 Oct 2012 at 6:09

[GoogleCodeExporter]

Donation ready...Galaxy S3 Touchwiz...please update this app..thanks

Original comment by wedmserv...@gmail.com on 30 Oct 2012 at 7:44

[GoogleCodeExporter]

Another post-update donation is ready an waiting. Please and thank you!

Original comment by fcwe...@gmail.com on 31 Oct 2012 at 3:16

[GoogleCodeExporter]

I Too am having the same problems. I however am not waiting for the fix to 
donate. Maybe if we all donated the dev might get it done sooner. These guys 
don't just work on apps for us. They too have jobs. Thanks for the hard work 
and excellent app. 

Original comment by hiflyer...@gmail.com on 1 Nov 2012 at 8:50

[GoogleCodeExporter]

Please let us know what the fix is once a solution is found (willing to donate).

Original comment by gravityr...@gmail.com on 5 Nov 2012 at 10:55

[GoogleCodeExporter]

Please update.. Thank you

Original comment by tdi...@gmail.com on 7 Nov 2012 at 10:56

[GoogleCodeExporter]

fix wifi tether please!!!

Original comment by NorthEnd...@gmail.com on 8 Nov 2012 at 7:13

[GoogleCodeExporter]

I too have a donation for the devs who resolve this issue... Anything it takes. 
We know that you have jobs and lives too. Would also being willing to beta test 
for said devs. 

Original comment by lovebug1...@gmail.com on 12 Nov 2012 at 9:52

[GoogleCodeExporter]

Wifi tether working now. 
http://beta.androidfilehost.com/?fid=9390169635556426338

Original comment by jayhuffd...@gmail.com on 14 Nov 2012 at 12:52

[GoogleCodeExporter]

Is working for me...  Thanks (Samsung galaxy s3 sprint version)  jellybean 4.1

Original comment by DjElMons...@gmail.com on 14 Nov 2012 at 1:46

[GoogleCodeExporter]

What'd you press to make it work?

Original comment by lovebug1...@gmail.com on 14 Nov 2012 at 1:48

[GoogleCodeExporter]

I just choose samsung galaxy s3 in device profile.  Enable mss clamping and 
routing fix

Original comment by DjElMons...@gmail.com on 14 Nov 2012 at 1:51

[GoogleCodeExporter]

What about that thing on main screen that you can check?

Original comment by lovebug1...@gmail.com on 14 Nov 2012 at 1:53

[GoogleCodeExporter]

I did not touch that

Original comment by DjElMons...@gmail.com on 14 Nov 2012 at 2:00

[GoogleCodeExporter]

Mine still won't show the SSID... idk what the hell is wrong.

Original comment by lovebug1...@gmail.com on 14 Nov 2012 at 2:22

[GoogleCodeExporter]

I did default install and all works fine. It didn't work until I choose install 
Samsung binaries from the menu. Then it worked fie.

Original comment by sh...@hepler.me on 14 Nov 2012 at 2:31

[GoogleCodeExporter]

I now show the SSID but can't connect to it. Windows 7 starter and Sprint GS3 
jelly beaned.

Original comment by P.R.Meun...@gmail.com on 14 Nov 2012 at 3:07

[GoogleCodeExporter]

for me is working good

Original comment by DjElMons...@gmail.com on 14 Nov 2012 at 3:26

[GoogleCodeExporter]

I tried the TrevE mod yesterday and I was able to see the SSID only the first 
time but wasn't able to connect to it. Then when I restarted my phone it would 
only show a black screen after unlocking. 

Sprint Galaxy S iii 4.1 Rooted Stock

Original comment by eric.def...@gmail.com on 14 Nov 2012 at 3:11

[GoogleCodeExporter]

Sprint Samsung Galaxy s3 stock jellybean rooted, not working!

Original comment by tdi...@gmail.com on 14 Nov 2012 at 8:54