Loaded the code onto a Bluepill (STM32F103C8T6) with a MCP2551 transceiver; made sure I had the +1.9.0 core, and uploaded via ST-Link and Arduino Genuino (Generic STM32F1/Bluepill F103C8/USART on serial, and upload via STM32CubeProgrammer (SUD)).
So far, no luck - as soon as load is placed on the battery, power is cut.
All I can be sure of is that the LED will light up on PA2 if it's not in programming mode.
Not having luck here.
Loaded the code onto a Bluepill (STM32F103C8T6) with a MCP2551 transceiver; made sure I had the +1.9.0 core, and uploaded via ST-Link and Arduino Genuino (Generic STM32F1/Bluepill F103C8/USART on serial, and upload via STM32CubeProgrammer (SUD)).
So far, no luck - as soon as load is placed on the battery, power is cut.
All I can be sure of is that the LED will light up on PA2 if it's not in programming mode.
Any suggestions to troubleshoot this thing?