Open redmateria opened 9 years ago
What's the output of dispatch list
? Have you tried using each connection separately with dispatch, to check if they work individually?
john@john:~$ dispatch list lo 127.0.0.1 (IPv4, internal) ::1 (IPv6, internal)
eth0 192.168.10.2 (IPv4) fe80::fe61:98ff:fe00:23c5 (IPv6)
wlan0 192.168.0.110 (IPv4) fe80::227c:8fff:fe2e:577d (IPv6)
this is what I get in dispatch list.
As morhaus stated, try each interface. Use command : dispatch start interface-address.
For your eth0: dispatch start 192.168.10.2
and for wlan0: dispatch start 192.168.0.110
Command above will start dispatch as socks proxy. To test the connection, setup your browser to use socks proxy to localhost with port 1080 and see if you can connect to internet with that.
Oopsie sorry...
i tried it both, ethernet and wlan. But the wlan connection is not working. Im not sure if this is an issue with my hardware.
When Im using the ethernet it just works flawlessly. But in WLAN i have no luck..
There is also an error. You can check out the log error [a4979e] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete error [ecf513] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete error [69ccc0] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete error [2108d7] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete error [094b64] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete error [8c257c] serverConnection Error: connect ETIMEDOUT at errnoException (net.js:901:11) at Object.afterConnect as oncomplete
I have the same problem! Did you find any solution?
I finally could solve it. For this you need to configure routing table :
sudo echo 101 eth0 >> /etc/iproute2/rt_tables sudo echo 101 wlan0 >> /etc/iproute2/rt_tables
ip route add 192.168.10.0/24 dev eth0 scope link table eth0 ip route add default via 192.168.10.1 dev eth0 table eth0 #(LAN router IP)
ip route add 192.168.0.0/24 dev wlan0 scope link table wlan0 ip route add default via 192.168.0.1 dev wlan0 table wlan0 #(Wifi router IP)
ip rule add from 192.168.1.0/24 table eth0 ip rule add from 192.168.2.0/24 table wlan0
Thank you for sharing your solution. But sadly I am now in Arch Linux, but I will try your solution in Arch.
I have same problem, but I can't solve it on Ubuntu 16.04.
Hi,
Im using ubuntu 12.04, and when i try to use dispatch-proxy it doesnt combine my LAN and WLAN (neighbor wifi). My internet speed is 2Mbps and my neighbors wifi has 1 Mbps..
Really wanted this because connectify dispatch is too heavy for my system.
Thanks.