alexmaloteaux the-bus-pirate issues

alexmaloteaux / the-bus-pirate

Automatically exported from code.google.com/p/the-bus-pirate

Other

0 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Changing the master and slave vocabulary

#75 bopopescu opened 4 years ago
0
Update to SPI script in pyBusPirateLite

#74 GoogleCodeExporter opened 8 years ago
1
Update to SPI script in pyBusPirateLite

#73 GoogleCodeExporter opened 8 years ago
2
Incorrect SPI1CON1 prescaler values for SPI binary mode with freq >= 2.6MHz

#72 GoogleCodeExporter opened 8 years ago
0
V4 SPI_sniffer: wrong (1) and skipping every second read (or wrong reads) when using (2) macro

#71 GoogleCodeExporter opened 8 years ago
0
SPISniffer output is not flushed

#70 GoogleCodeExporter opened 8 years ago
0
automatic switch to bootloader through pirate-loader

#69 GoogleCodeExporter opened 8 years ago
0
BitBang.py bug/typo on line 125/126

#68 GoogleCodeExporter opened 8 years ago
2
Fix tab/space consistency in python

#67 GoogleCodeExporter opened 8 years ago
0
SPI Mode: MOSI HiZ doesn't work

#66 GoogleCodeExporter opened 8 years ago
0
Binary Mode misbehaves after receiving 20 zeroes at once

#65 GoogleCodeExporter opened 8 years ago
0
bpxsvfplayer utility has a major bug in serial initialization

#64 GoogleCodeExporter closed 8 years ago
1
pyBusPirate rawwire mode: a few commands broken

#63 GoogleCodeExporter opened 8 years ago
0
Patch for /trunk/source/procMenu.c

#62 GoogleCodeExporter opened 8 years ago
2
spi test script doesn't work

#61 GoogleCodeExporter closed 8 years ago
1
environment should be python2 not python

#60 GoogleCodeExporter opened 8 years ago
0
OpenOCD disabled

#59 GoogleCodeExporter opened 8 years ago
0
Allow to reset from bootloader

#58 GoogleCodeExporter opened 8 years ago
3
Annoyances in firmware archives

#57 GoogleCodeExporter opened 8 years ago
0
Patch to always have correct value of MAXPROTO

#56 GoogleCodeExporter closed 8 years ago
2
Patch to compile on Linux

#55 GoogleCodeExporter closed 8 years ago
10
basic interpreter fails to properly store entered code past line 1535

#54 GoogleCodeExporter opened 8 years ago
1
Support in SPI for CS (low-high enable) vs. CS# (high-low enable)

#53 GoogleCodeExporter closed 8 years ago
1
Supplies power locks 'on' after SPI writes, mode switch

#52 GoogleCodeExporter closed 8 years ago
3
add the 4096 bytes ring-buffer also on binary modes

#51 GoogleCodeExporter opened 8 years ago
1
BP gets locked in bit-bang mode.

#50 GoogleCodeExporter closed 8 years ago
4
PirateRename doean't work on PPC macs

#49 GoogleCodeExporter opened 8 years ago
0
Make the I2C address for character LCD adapter configurable

#48 GoogleCodeExporter closed 8 years ago
1
parameter name mismatch

#47 GoogleCodeExporter opened 8 years ago
0
UART Live mode fix

#46 GoogleCodeExporter closed 8 years ago
2
Add stepper control

#45 GoogleCodeExporter opened 8 years ago
0
Add servo control

#44 GoogleCodeExporter closed 8 years ago
1
user interface (keypad/dispay)

#43 GoogleCodeExporter closed 8 years ago
1
Protocol: Nrf2401(RF-24G)

#42 GoogleCodeExporter closed 8 years ago
2
Binary UART access mode

#41 GoogleCodeExporter closed 8 years ago
1
python library for the Bus Pirate

#40 GoogleCodeExporter opened 8 years ago
5
Use global struct for data storage

#39 GoogleCodeExporter closed 8 years ago
2
UART bridge mode

#38 GoogleCodeExporter closed 8 years ago
1
0Tis Elevat0r C0mpany R3mote Stati0n Pr0tocol

#37 GoogleCodeExporter opened 8 years ago
2
JTAG Probe Chain Macro Only Finds First Device

#36 GoogleCodeExporter closed 8 years ago
4
I2C check for bus contention, timeout, clock streatching?

#35 GoogleCodeExporter opened 8 years ago
2
I2C slave mode in hardware library

#34 GoogleCodeExporter opened 8 years ago
0
Add clock sample and phase options to bitbang library

#33 GoogleCodeExporter opened 8 years ago
1
Automatic Baud Detection on Transparent UART Bridge Mode

#32 GoogleCodeExporter opened 8 years ago
6
1-Wire new device codes

#31 GoogleCodeExporter closed 8 years ago
2
Self test to verify pins and connections

#30 GoogleCodeExporter closed 8 years ago
2
Bootloader turns on LED

#29 GoogleCodeExporter closed 8 years ago
2
Program SPI/I2C EEPROMs from file

#28 GoogleCodeExporter closed 8 years ago
1
Support for large binary numbers

#27 GoogleCodeExporter closed 8 years ago
1
Support for large binary numbers

#26 GoogleCodeExporter opened 8 years ago
0