Kyocera FS-1028MFP - Device Busy

[agapovmax]

Connecting Kyocera FS-1028 over LAN. Enabled all WSD, Apple network features.

• OS - Astra Linux 1.7

• dpkg -l

  sane-utils     1.0.32-4+ci202112071753+astra3

• airscan-discover

  [devices]
  Kyocera FS-1028MFP = http://10.0.0.49:5358/WSDScanner, WSD

• airscan.conf

  [devices]
  "Kyocera MFP Scanner" = http://10.0.0.49:5358/WSDScanner, WSD
  "Kyocera eSCL" = http://10.0.0.49:9095/eSCL, eSCL ; only for test

• debug log

  Kyocera FS-1028MFP: HTTP POST http://10.0.0.49:5358/WSDScanner
  Kyocera FS-1028MFP: HTTP using timeout: 30000 ms
  Kyocera FS-1028MFP: HTTP resolving 10.0.0.49 5358
  Kyocera FS-1028MFP: HTTP trying 10.0.0.49:5358
  Kyocera FS-1028MFP: HTTP fdpoll: {--} -> {-w}
  Kyocera FS-1028MFP: HTTP 1841 bytes sent
  Kyocera FS-1028MFP: HTTP done request sending
  Kyocera FS-1028MFP: HTTP fdpoll: {-w} -> {rw}
  Kyocera FS-1028MFP: HTTP fdpoll: {rw} -> {r-}
  Kyocera FS-1028MFP: HTTP 1448 bytes received
  Kyocera FS-1028MFP: HTTP POST http://10.0.0.49:5358/WSDScanner: got response headers (500)
  Kyocera FS-1028MFP: HTTP 733 bytes received
  Kyocera FS-1028MFP: HTTP done response reception
  Kyocera FS-1028MFP: HTTP POST http://10.0.0.49:5358/WSDScanner: 500 Internal Server Error
  Kyocera FS-1028MFP: HTTP POST http://10.0.0.49:5358/WSDScanner: Internal Server Error
  Kyocera FS-1028MFP: PROTO_OP_SCAN: decoding
  Kyocera FS-1028MFP: fault code: ServerErrorNotAcceptingJobs
  Kyocera FS-1028MFP: PROTO_OP_SCAN: decoded: status="Success" next=PROTO_OP_CHECK delay=0
  Kyocera FS-1028MFP: PROTO_OP_CHECK: submitting: attempt=0

• fly-scan show message "Device busy"

• simple-scan show message "Can't start scanning" sane-kyocera.zip

[agapovmax]

up

[alexpevzner]

Kyocera probably needs manual action on its front panel to initiate WSD scan: Send->WSD Scan->From Computer. At least, my Kyocera ECOSYS M2040dn works this way, and some other reported too.

https://github.com/alexpevzner/sane-airscan#note5

[alexpevzner]

BTW, eSCL on my Kyocera can be enabled and disabled. If your printer supports eSCL, but it is disabled by default, it makes sense to enable it: eSCL works there much better and doesn't require any manual actions.

[agapovmax]

@alexpevzner thanx. Send->WSD Scan->From Computer helps. Unfortunately, Kyocera MFP1028 doesn't support eSCL. Please add info about this model!