Canon PIXMA MX475: working

[xlacroixx]

Canon PIXMA MX475 (PIXMA MX470 series), a WSD printer, is working with standard settings. Higher quality settings not tested.

Available options dump

> scanimage -A
Output format is not set, using pnm as a default.
All options specific to device `airscan:w1:Canon MX470 series':
  Standard:
    --resolution 150|300|600dpi [300]
        Sets the resolution of the scanned image.
    --mode Color|Gray [Color]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --source Flatbed|ADF [Flatbed]
        Selects the scan source (such as a document-feeder).
  Geometry:
    -l 0..215.9mm [0]
        Top-left x position of scan area.
    -t 0..296.672mm [0]
        Top-left y position of scan area.
    -x 0..215.9mm [215.9]
        Width of scan-area.
    -y 0..296.672mm [296.672]
        Height of scan-area.
  Enhancement:
    --brightness -100..100% (in steps of 1) [0]
        Controls the brightness of the acquired image.
    --contrast -100..100% (in steps of 1) [0]
        Controls the contrast of the acquired image.
    --shadow 0..100% (in steps of 1) [0]
        Selects what radiance level should be considered "black".
    --highlight 0..100% (in steps of 1) [100]
        Selects what radiance level should be considered "white".
    --analog-gamma 0.0999908..4 [1]
        Analog gamma-correction
    --negative[=(yes|no)] [no]
        Swap black and white
    --adf-justification-x <string> [inactive]
        ADF width justification (left/right/center)
    --adf-justification-y <string> [inactive]
        ADF height justification (top/bottom/center)

[alexpevzner]

Thank a lot for reporting this!