search

alexqzd / Marlin-H32

JyersUI port for Aquila H32 Printers
52 stars 18 forks source link

Aquila X2 removal of the temperature limit from 260 to 300 #29

Open NurikNar opened 1 year ago

NurikNar commented 1 year ago

Hello. I would like to ask you for help. If anyone else can help I would be very happy. I want to say in advance that you have made a great contribution to custom 3D printing, and I am very grateful to you for this. I state the essence of the problem. I have an Aquila X2 3D printer with H32 motherboard. Yes, I used your ready firmware .bin file. But there is a limitation on the maximum heating of the heating nozzle by 260 degrees, I would like to increase this value to 300, since my Extruder allows me to heat up to this temperature. Can someone send the finished firmware with this setting ??? I wanted to make a firmware for this printer myself, but I can’t assemble the firmware (Marlin) for this board, since there is no such option in the list of motherboards (chips). There are on G 32 and N 32. If you compile for these boards or some suitable ones, then a black screen comes out after the printer is flashed. I'm sorry, maybe I'm asking stupid questions, but I started to study this topic relatively recently. Oh yes and more. I flashed your Marlin configuration with my Aquila s 2 settings and everything worked for me. Thank you for that. I hope someone can help me with my problem with Aquila X2. Thank you all in advance. nuriknar2016@gmail.com

Mik-S-UMS commented 1 year ago

If you are trying to do this on windows it will give an error due to a limitation (Command prompt cannot handle the length of some strings resulting in error 87)

There are a couple of guides on reddit on how to do it in a VM using Linux. One of these may help.

https://www.reddit.com/r/VoxelabAquila/comments/wmeoty/how_to_compile_custom_alex_firmware_h32_board/ https://www.reddit.com/r/VoxelabAquila/comments/u14l60/compile_h32_alex_firmware_in_windows_on_eclipse/

NurikNar commented 1 year ago

If you are trying to do this on windows it will give an error due to a limitation (Command prompt cannot handle the length of some strings resulting in error 87)

There are a couple of guides on reddit on how to do it in a VM using Linux. One of these may help.

https://www.reddit.com/r/VoxelabAquila/comments/wmeoty/how_to_compile_custom_alex_firmware_h32_board/ https://www.reddit.com/r/VoxelabAquila/comments/u14l60/compile_h32_ale_firmware_in_windows_on_eclipse/

16763088060853702551120389332738

and then what to choose from this list for compiling the firmware ??? for H32 chip??

Mik-S-UMS commented 1 year ago

Sorry I don't know, I have not done it myself.

From those guides it seemed to be already set up with the correct chip in the H32 repository.

I don't know if this is the one but there is a hc32f46x.svd file in Marlin-H32/firmware/

NurikNar commented 1 year ago

thanks for answering my questions. it's important for me. I also saw this file with all the folders, but I did not understand how to use them and this file. how to use it? in some folder to throw where Platformio is installed? Or in a folder with Marlin?