search

alexqzd / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
http://marlinfw.org
GNU General Public License v3.0
196 stars 71 forks source link

Cannot install (again) #13

Open Tousakusha opened 2 years ago

Tousakusha commented 2 years ago

Description

I cannot install the Manual-Mesh N32 Firmware !again!.

Steps to Reproduce

  1. I Updated from Stock-Firmware to Manual-Mesh N32
  2. Later i Bought a 3D Touch, upgraded to BL-Touch Firmware N32
  3. 3D Touch Broke and i wanted to go back to Manual Mesh N32

Expected behavior: Now i expected the Printer to have the Manual-Mesh Firmware.

Actual behavior: But it will not install

Additional Information

I could install the Stock-Firmware without problem. But when i try to upgrade now it looks like this: https://ibb.co/4gndRJ4

jrb4562 commented 2 years ago

@Tousakusha did you find a solution to this? I am seeing the same error although I cannot even get the original firmware to install and get back into the menu now

Tousakusha commented 2 years ago

@jrb4562, my solution so far is to just try again and again. After using different sd-cards it worked once. I did not want to try again to see if i did something wrong.

classicrocker883 commented 2 years ago

@Tousakusha try renaming the firmware file. put in a folder called firmware. if that doesnt work put in root folder, which is directly on the drive not in any folder.

jordanmarchetto commented 2 years ago

I'm having a similar issue.

I had manual mesh g32 firmware installed, I bought a cr touch, I tried to install the bltouch firmware, and it doesn't seem to be working. I still see manual mesh settings, I don't see any bltouch settings.