search

alexqzd / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
http://marlinfw.org
GNU General Public License v3.0
197 stars 71 forks source link

Black Screen After install N32 v1.3.5 #14

Open jrb4562 opened 2 years ago

jrb4562 commented 2 years ago

I installed the BLTouch-3x3-N32 version and all seemed to go well and I got the progress bar and checkbox however the system never booted into the menu again and just stayed on this screen image

After removing the SD card and rebooting I am now stuck on a black screen with backlight. I have attempted to revert to OOB firmware with the same results. Any ideas?

classicrocker883 commented 2 years ago

https://github.com/classicrocker883/Marlin/releases/tag/v1.3.5

try my fork. I know there isn't BL touch 3x3. I'll try to upload more copies. but since u have one try the Ubl7x7. it's faster and overall better. you get more points to probe the bed for a more accurate level

stijnb1234 commented 2 years ago

https://github.com/classicrocker883/Marlin/releases/tag/v1.3.5

try my fork. I know there isn't BL touch 3x3. I'll try to upload more copies. but since u have one try the Ubl7x7. it's faster and overall better. you get more points to probe the bed for a more accurate level

Works fine for me. Only 'problem' I have with it, is a white bar at top, and the changes in font color (like aqua / orange).

classicrocker883 commented 2 years ago

Works fine for me. Only 'problem' I have with it, is a white bar at top, and the changes in font color (like aqua / orange).

I had forgotten to change back to default colors when I compiled firmware for my own. but you can go into advanced settings and change it to whatever you'd like - sorry for the inconvenience