Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
have an issue where I start a print and within about 30 seconds of starting a print it randomly;y starts to purge filament then on the screen it stated press continue to purge more... there is no purge script in my start gcode or anywhere else I have printed the file 5 times today with no issue at all... what can be the problem with it
Steps to Reproduce
slice model as normal
press start on the printer
30 secs later it tries a purge randomly
Expected behaviour: print normally
Actual behaviour: waste filament
Additional Information
I am using the .bin downloaded from the asses section the bltouch 4x4 g32 NON HS version
Include a ZIP file containing your Configuration.h and Configuration_adv.h files.
Provide pictures or links to videos that clearly demonstrate the issue.
Description
have an issue where I start a print and within about 30 seconds of starting a print it randomly;y starts to purge filament then on the screen it stated press continue to purge more... there is no purge script in my start gcode or anywhere else I have printed the file 5 times today with no issue at all... what can be the problem with it
Steps to Reproduce
Expected behaviour: print normally
Actual behaviour: waste filament
Additional Information
I am using the .bin downloaded from the asses section the bltouch 4x4 g32 NON HS version
Configuration.h
andConfiguration_adv.h
files.