Closed virusmoere closed 1 year ago
Hier noch die Ausgabe der hier geposteten, bereits kompilierten Firmware:
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:6216
load:0x40078000,len:14488
load:0x40080400,len:3416
entry 0x40080638
I (317) cpu_start: Pro cpu up.
I (317) cpu_start: Application information:
I (317) cpu_start: Project name: HB-RF-ETH
I (320) cpu_start: App version: 1.2.9
I (324) cpu_start: Compile time: Feb 1 2021 22:00:32
I (330) cpu_start: ELF file SHA256: e196b0f4ca5f5f1b...
I (336) cpu_start: ESP-IDF: 3.40200.210118
I (342) cpu_start: Starting app cpu, entry point is 0x4008244c
I (0) cpu_start: App cpu up.
I (352) heap_init: Initializing. RAM available for dynamic allocation:
I (359) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (365) heap_init: At 3FFB4388 len 0002BC78 (175 KiB): DRAM
I (372) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (378) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (384) heap_init: At 4008ED10 len 000112F0 (68 KiB): IRAM
I (390) cpu_start: Pro cpu start user code
I (430) spi_flash: detected chip: generic
I (430) spi_flash: flash io: dioI (455) system_api: Base MAC address is not set
I (455) system_api: read default base MAC address from EFUSE
I (455) gpio: GPIO[34]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (465) gpio: GPIO[23]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (475) uart: ESP_INTR_FLAG_IRAM flag not set while CONFIG_UART_ISR_IN_IRAM is enabled, flag updated
I (485) uart: queue free spaces: 20
E (605) lan8720: lan8720_init(393): wrong chip ID
E (605) esp_eth: esp_eth_driver_install(199): init phy failed
ESP_ERROR_CHECK_WITHOUT_ABORT failed: esp_err_t 0xffffffff (ESP_FAIL) at 0x40085407
file: "src/ethernet.cpp" line 88
func: Ethernet::Ethernet(Settings*)
expression: esp_eth_driver_install(&_eth_config, &_eth_handle)
E (625) esp_eth: esp_eth_increase_reference(385): ethernet driver handle can't be null
E (625) esp_eth: esp_eth_update_input_path(307): ethernet driver handle can't be null
E (635) esp_eth: esp_eth_ioctl(345): ethernet driver handle can't be null
I (645) esp_eth.netif.glue: 5c:34:0d:80:70:5f
I (645) esp_eth.netif.glue: ethernet attached to netif
E (655) esp_eth: esp_eth_start(257): ethernet driver handle can't be null
ESP_ERROR_CHECK_WITHOUT_ABORT failed: esp_err_t 0x102 (ESP_ERR_INVALID_ARG) at 0x40085407
file: "src/ethernet.cpp" line 94
func: void Ethernet::start()
expression: esp_eth_start(_eth_handle)
E (685) RTC: No RTC found.
E (605) lan8720: lan8720_init(393): wrong chip ID E (605) esp_eth: esp_eth_driver_install(199): init phy failed ESP_ERROR_CHECK_WITHOUT_ABORT failed: esp_err_t 0xffffffff (ESP_FAIL) at 0x40085407
Falsche oder defekte Hardware
Danke für die Rückmeldung. Ein Fall für smartkram.de? Die Platine ist gerade neu.
Es ist schwer, dass nur aufgrund eines Github Tickets zu beurteilen bei einer Platine, welche smartkram nur als Bausatz verkauft. Aber tendentiell ja.
Ok, ich frage da mal nach. Wirklich viel machen kann ich dann ja sonst nicht.
Nach dem vierten Reboot einer heute zusammengebauten Platine habe ich dasselbe Verhalten. Am Port des Switches leuchtet das LED für PoE, aber das für Daten nicht. Und per DHCP holt er sich auch keine Adresse.
@virusmoere Hat sich smartkram bei dir gemeldet? Ich habe bisher keine Antwort bekommen.
@agross ich habe kommentarlos eine neue Platine zugeschickt bekommen. Seitdem keine Probleme mehr.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Hi,
I just finished the HB-RF-ETH with PoE and powered it on the first time. The device is getting power but there is no LAN connection. When connecting via USB and LAN (without PoE) running the serial monitor I get the following output: