Closed github6043 closed 2 years ago
Schräge Sache, wenn ich meinen Snapshot wiederherstelle, erhalte ich mit debmatic-info
debmatic version: 3.61.6-82 Kernel modules: Available Raw UART dev: Available HMRF Hardware: RPI-RF-MOD Connected via: HB-RF-ETH@192.168.34.105 (/dev/raw-uart) Board serial: 58A992F4B1 Radio MAC: 0xFFF4B1 HMIP Hardware: RPI-RF-MOD SGTIN: 3014F711A0001F58A992F4B1 Radio MAC: 0xB79139
nach dem reboot der VM jedoch
debmatic version: 3.61.6-82 Kernel modules: Available Raw UART dev: Available HMRF Hardware: unknown Board serial: unknown Radio MAC: unknown HMIP Hardware: unknown SGTIN: unknown Radio MAC: unknown
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Hallo Alex Ich habe wohl ein grösseres Problem, meine debmatic kann nicht mehr mit dem HB-RF-ETH Modul kommunizieren. Firmware ist 1.2.9, einen Factory Reset habe ich bereits durchgeführt. Weiter die Firmware nochmals geflasht. Auf die HB-RF-ETH kann ich Verbinden, die Einstellungen sind korrekt. Auf der Funkplatine leutet die grüne LED permanent. debmatic-info zeigt
debmatic version: 3.61.6-82 Kernel modules: Available Raw UART dev: Available HMRF Hardware: unknown Board serial: unknown Radio MAC: unknown HMIP Hardware: unknown SGTIN: unknown Radio MAC: unknown
Habe die eQ-3/ELV RPI-RF-MOD im Einsatz, Lieferfrist 17 Wochen :-(