alexreinert / piVCCU

piVCCU is a project to install the original Homematic CCU3 firmware inside a virtualized container (lxc) on ARM based single board computers.
Apache License 2.0
307 stars 65 forks source link

Support for NanoPi M4 (Rockchip RK3399) #102

Closed XtraLarge closed 5 years ago

XtraLarge commented 5 years ago

Hi,

my raspberry with iobroker anderen pivccu didn't had enough performance so I bought a NanoPi M4. This one had enough performance to run both, but pivccu didn't supoort this chipset. .... It would be great If you can change this:)

alexreinert commented 5 years ago

Take a look at the GPIO header: Physically not possible to attach the radio module there as the GPIO header has no 2.54mm pitch.

XtraLarge commented 5 years ago

Hi,

please take a look at http://wiki.friendlyarm.com/wiki/index.php/NanoPi_M4

GPIO1 has a 40 pin 2.54mm layout. (same as Raspberry)

alexreinert commented 5 years ago

Sorry, I mixed this up with the NanoPi Neo4. I have no test device, but according to the pin description in the wiki, it dhould be possible. If yor are willing to support me with some tests, I can add something in abour one week.

XtraLarge commented 5 years ago

This would be great. Thank you!

XtraLarge commented 5 years ago

If you wish I can give you an access to the nanopc m4. So you can access ssh and web by your own.

alexreinert commented 5 years ago

Sorry, took me some time to build an image because of the holidays. Can you please test the image https://www.pivccu.de/images/piVCCU3/dev/Armbian_5.68_Nanopim4_Debian_stretch_dev_4.19.0.zip with an attached radio module? pivccu-info should detect the radio module and the WebUI of the CCU should respond quick.

XtraLarge commented 5 years ago

Hello, I've installed the image but Ican't get an IP Adress of the PIVCCU Web Interface. Perhaps you will get a look .... I've isolated the System an opened an ssh port. The system ist bare/not configured. I'll give you the address with a private email. Pleae send me your address at eMail@WilliWerres.de.

alexreinert commented 5 years ago

Released in testing apt repo

alexreinert commented 5 years ago

Released in stable apt repo