Closed steilerDev closed 2 years ago
P.S.: System information:
/etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
VERSION_CODENAME=stretch
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
pivccu-info
(I removed the MAC and SGTIN)
piVCCU version: 3.61.7-69
Kernel modules: Available
Raw UART dev: Available
Rasp.Pi UART: Assigned to GPIO pins
HMRF Hardware: RPI-RF-MOD
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
Board serial: XXX
Radio MAC: XXX
HMIP Hardware: RPI-RF-MOD
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
SGTIN: XXX
Radio MAC: XXX
State: RUNNING
PID: 3969
IP: 10.13.0.171
IP: 2003:ee:374c:2503:98bc:c6ff:feee:57a1
CPU use: 183.82 seconds
BlkIO use: 556.00 KiB
Memory use: 195.07 MiB
KMem use: 5.26 MiB
Link: vethpivccu
TX bytes: 13.97 MiB
RX bytes: 4.70 MiB
Total bytes: 18.67 MiB
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Hi!
I've been using HomematicIP with piVCCU for quite some time and I love the project and great work that has been put in! Also the solution - so far - has been rock solid and very reliable.
However over night, for some reason, the CCU went offline. After some reboots of my whole stack (piVCCU + openHAB 3) I was able to get the system back online and operational. However the logs (path on the host
/tmp/pivccu-var/log/messages
) is still creating a significant amount of errors when navigating the WebUI (very specifically when going to the rooms and navigate them):I'm a bit lost on how to further debug this and would love to get your help!
Thanks!