Closed e36910 closed 3 years ago
Ladder pedal mode requires 2 pins: one digital and one analog. For example pedal 1 is using PIN_D1 (25) and PIN_A1 (36). Check schematics for correct wiring.
Is it correct settings?
If Pedal 1 is configured as Ladder use the Button value in every action to distinguish the 6 footswitches and assign separate actions.
Do you have exaple sutup pedal 1 via web interface?
I use this schematic with R10. Working only 5 buttons. Schematic on the project doesn't work.
Did you calibrated you ladder as indicated in the instructions here https://github.com/alf45tar/PedalinoMini#booting-modes?
No, because I haven`t display. My pedal will be without display.
Without a display you need to calculate the ladder levels and enter into the Options
Did you do the math?
I can setup only 6 footswitch using pin 13, 12, 14, 27, 26, 25. But I don't understand how to use for exemple only pin 13 with 6 footswitch and pin 12 with 6 footswitch to get a total of 12 pedals and using pin 14 to get wah pedal. I want using photoresistor as wah pedal. How to connecting and setup this? Thank you.