search

alf45tar / PedalinoMini

Wireless and Bluetooth MIDI Foot Controller
GNU General Public License v3.0
479 stars 84 forks source link

ABOUT PROFILES IN YOUTUBE VIDEO #391

Closed bobvc133 closed 1 year ago

bobvc133 commented 1 year ago

Can you post the full configuration files of both videos? Snipaste_2022-11-12_13-37-37

bobvc133 commented 1 year ago

Another question is is the encoder not suitable for the TTGO T DISPLAY development board?

alf45tar commented 1 year ago

The full configuration of the first video is the 'mustang' configuration file. It is not yet updated for version 3 with Controls. I do not have anymore the configuration of the second video because it was a test. Just set the Actions Send as Repeat.

Encoders can be used with any board.

bobvc133 commented 1 year ago

The full configuration of the first video is the 'mustang' configuration file. It is not yet updated for version 3 with Controls. I do not have anymore the configuration of the second video because it was a test. Just set the Actions Send as Repeat.

Encoders can be used with any board.

There seems to be an error in the configuration file. It should be that the format has not been updated. I am using the 2.5.2 firmware and there is no control function. My TTGO development board uses the encoder only the switch is normal, the runner is not normal

Snipaste_2022-11-12_17-50-52

Snipaste_2022-11-12_17-51-16

Snipaste_2022-11-12_17-51-26

alf45tar commented 1 year ago

Use sponsor 2.5.4

bobvc133 commented 1 year ago

Use sponsor 2.5.4

At the beginning of the test, the 2.5.4 firmware was used. I found that the configuration file format was not updated.

Snipaste_2022-11-12_18-21-05

Snipaste_2022-11-12_18-19-30

alf45tar commented 1 year ago

Did you updated the Filesytem Image too?

bobvc133 commented 1 year ago

My fault, I used an old config file from the public firmware

bobvc133 commented 1 year ago

Did you updated the Filesytem Image too?

I uploaded the configuration file in the sponsor version, the action and pedal settings are normal, but on the TTGO development board, only the switch is working properly, the wheel is not normal, the EPS32 doit development board switch and the wheel are both normal