alf45tar
commented
1 year ago serial.serialutil.SerialException: [Errno 2] could not open port /dev/tty.SLAB_USBtoUART: [Errno 2] No such file or directory: '/dev/tty.SLAB_USBtoUART'
I think you didn't installed the driver to use the serial via USB. Check platformio.ini for more info or download them from
https://www.silabs.com/documents/public/software/Mac_OSX_VCP_Driver.zip
Regards alf45tar
WernAir77
Hi, I have a working pedalino with a very old software version. I build it 2020 or so. I can't update OTA, so I tried to flash the ESP with the newest version. Build after choosing build about 17 errors exit and after trying to upload nothing happened, but error 1. I know I had similar issues at the first time, but I can't remember how I solved them. I run Ventura on a M1 Mac. I downloaded VSCode and Xcode, installed platformIO, performed git: clone, select the SSH display in line 14/15 and select Esp32doit-devkit-v1 in the project tasks, then build and after that upload or upload an Monitor.
Problems during building: [{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/AppleMIDI/src/rtpMIDI_Parser_JournalSection.hpp", "owner": "cpp", "severity": 4, "message": "unused variable 'S_flag' [-Wunused-variable]", "startLineNumber": 140, "startColumn": 18, "endLineNumber": 140, "endColumn": 18 },{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/AppleMIDI/src/rtpMIDI_Parser_JournalSection.hpp", "owner": "cpp", "severity": 4, "message": "unused variable 'channelNr' [-Wunused-variable]", "startLineNumber": 141, "startColumn": 21, "endLineNumber": 141, "endColumn": 21 },{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/AppleMIDI/src/rtpMIDI_Parser_JournalSection.hpp", "owner": "cpp", "severity": 4, "message": "unused variable 'H_flag' [-Wunused-variable]", "startLineNumber": 142, "startColumn": 18, "endLineNumber": 142, "endColumn": 18 },{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/BLE-MIDI/src/BLEMIDI_Transport.h", "owner": "cpp", "severity": 4, "message": "unused variable 'timestampHigh' [-Wunused-variable]", "startLineNumber": 260, "startColumn": 14, "endLineNumber": 260, "endColumn": 14 },{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/BLE-MIDI/src/BLEMIDI_Transport.h", "owner": "cpp", "severity": 4, "message": "variable 'timestamp' set but not used [-Wunused-but-set-variable]", "startLineNumber": 263, "startColumn": 18, "endLineNumber": 263, "endColumn": 18 },{ "resource": "/Users/wernair/PedalinoMini-master/.pio/libdeps/esp32doit-devkit-v1/TFT_eSPI/TFT_eSPI.h", "owner": "cpp", "severity": 4, "message": "#warning >>>>------>> TOUCH_CS pin not defined, TFT_eSPI touch functions will not be available! [-Wcpp]", "startLineNumber": 955, "startColumn": 8, "endLineNumber": 955, "endColumn": 8 },{ "resource": "/Users/wernair/PedalinoMini-master/src/Controller.h", "owner": "cpp", "severity": 4, "message": "'void adc_power_off()' is deprecated [-Wdeprecated-declarations]", "startLineNumber": 1366, "startColumn": 15, "endLineNumber": 1366, "endColumn": 15 },{ "resource": "/Users/wernair/PedalinoMini-master/src/Controller.h", "owner": "cpp", "severity": 4, "message": "'void adc_power_off()' is deprecated [-Wdeprecated-declarations]", "startLineNumber": 1366, "startColumn": 29, "endLineNumber": 1366, "endColumn": 29 },{ "resource": "/Users/wernair/PedalinoMini-master/src/LedsEffects.h", "owner": "cpp", "severity": 4, "message": "variable 'thissat' set but not used [-Wunused-but-set-variable]", "startLineNumber": 311, "startColumn": 20, "endLineNumber": 311, "endColumn": 20 },{ "resource": "/Users/wernair/PedalinoMini-master/src/Pedalino.h", "owner": "cpp", "severity": 4, "message": "format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Wformat=]", "startLineNumber": 508, "startColumn": 57, "endLineNumber": 508, "endColumn": 57 },{ "resource": "/Users/wernair/PedalinoMini-master/src/UdpMidiOut.h", "owner": "cpp", "severity": 4, "message": "'midi::MidiInterface<Transport, Settings, Platform>& midi::MidiInterface<Transport, _Settings, _Platform>::sendPolyPressure(midi::DataByte, midi::DataByte, midi::Channel) [with Transport = appleMidi::AppleMIDISession; _Settings = appleMidi::AppleMIDISettings; _Platform = midi::DefaultPlatform; midi::DataByte = unsigned char; midi::Channel = unsigned char]' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 126,
"startColumn": 104,
"endLineNumber": 126,
"endColumn": 104
},{
"resource": "/Users/wernair/PedalinoMini-master/src/UdpMidiOut.h",
"owner": "cpp",
"severity": 4,
"message": "'midi::MidiInterface<Transport, Settings, Platform>& midi::MidiInterface<Transport, _Settings, _Platform>::sendPolyPressure(midi::DataByte, midi::DataByte, midi::Channel) [with Transport = ipMidi::ipMidiTransport; _Settings = midi::DefaultSettings; _Platform = midi::DefaultPlatform; midi::DataByte = unsigned char; midi::Channel = unsigned char]' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 253,
"startColumn": 102,
"endLineNumber": 253,
"endColumn": 102
},{
"resource": "/Users/wernair/PedalinoMini-master/src/WebConfigAsync.h",
"owner": "cpp",
"severity": 4,
"message": "suggest parentheses around '&&' within '||' [-Wparentheses]",
"startLineNumber": 5055,
"startColumn": 53,
"endLineNumber": 5055,
"endColumn": 53
},{
"resource": "/Users/wernair/PedalinoMini-master/src/WebConfigAsync.h",
"owner": "cpp",
"severity": 4,
"message": "'void adc_power_off()' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 5127,
"startColumn": 5,
"endLineNumber": 5127,
"endColumn": 5
},{
"resource": "/Users/wernair/PedalinoMini-master/src/WebConfigAsync.h",
"owner": "cpp",
"severity": 4,
"message": "'void adc_power_off()' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 5127,
"startColumn": 19,
"endLineNumber": 5127,
"endColumn": 19
},{
"resource": "/Users/wernair/PedalinoMini-master/Users/wernair/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c",
"owner": "cpp",
"severity": 4,
"message": "initialization from incompatible pointer type [-Wincompatible-pointer-types]",
"startLineNumber": 922,
"startColumn": 39,
"endLineNumber": 922,
"endColumn": 39
},{
"resource": "/Users/wernair/PedalinoMini-master/Users/wernair/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c",
"owner": "cpp",
"severity": 4,
"message": "initialization from incompatible pointer type [-Wincompatible-pointer-types]",
"startLineNumber": 923,
"startColumn": 40,
"endLineNumber": 923,
"endColumn": 40
}]
Problems during upload: Traceback (most recent call last): File "/Users/wernair/.platformio/penv/lib/python3.9/site-packages/serial/serialposix.py", line 322, in open Serial port /dev/tty.SLAB_USBtoUART self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK) FileNotFoundError: [Errno 2] No such file or directory: '/dev/tty.SLAB_USBtoUART'
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/Users/wernair/.platformio/packages/tool-esptoolpy/esptool.py", line 4582, in
_main()
File "/Users/wernair/.platformio/packages/tool-esptoolpy/esptool.py", line 4575, in _main
main()
File "/Users/wernair/.platformio/packages/tool-esptoolpy/esptool.py", line 4074, in main
esp = esp or get_default_connected_device(ser_list, port=args.port, connect_attempts=args.connect_attempts,
File "/Users/wernair/.platformio/packages/tool-esptoolpy/esptool.py", line 120, in get_default_connected_device
_esp = chip_class(each_port, initial_baud, trace)
File "/Users/wernair/.platformio/packages/tool-esptoolpy/esptool.py", line 313, in init
self._port = serial.serial_for_url(port)
File "/Users/wernair/.platformio/penv/lib/python3.9/site-packages/serial/init.py", line 90, in serial_for_url
instance.open()
File "/Users/wernair/.platformio/penv/lib/python3.9/site-packages/serial/serialposix.py", line 325, in open
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 2] could not open port /dev/tty.SLAB_USBtoUART: [Errno 2] No such file or directory: '/dev/tty.SLAB_USBtoUART'
*** [upload] Error 1
===================================== [FAILED] Took 4.71 seconds =====================================
Environment Status Duration
esp32doit-devkit-v1 FAILED 00:00:04.714
I need help...