Closed jimhiggs closed 3 years ago
I repurposed an old radio shack RF Mod i/f box. So a few holes not needed..... Two side red switches are pedal 1 and do bank up and down. Top red switch connects to D23 and does same as boot switch. Pedals 2-4 are general use, will have two expression and a Boss fs6 dual switch. Pedal 5 is dedicated to ladder pedal with tip/ring reversed internally for a TC Helicon switch6. Pedal 6 is not configured. @alf45tar Is the tip ring switch still needed now that you have just one ladder model?
Power adapter is 9v center +. Unfortunately with the TRS shell being ground and the dc adapter socket also being grounded, I could not make center -ve which would have allowed my other pedal power adapter to be used. Would need an insulated socket, probably with a plastic thread/nut to make that work. Was easier just to use a 12v adapter i had laying around and a cheap chinese buck converter adjusted to 5v.
Its built, now its time to start using it!