search

altLab / photon-resin-calibration

Anycubic Photon - Files and method to quickly find the best latitude exposure settings for any resin or 405nm UV coating
GNU General Public License v3.0
258 stars 43 forks source link

wrong thickness ? #10

Closed script-kitty closed 5 years ago

script-kitty commented 5 years ago

Open the file "resin-test-25u.B100.2-20.photon" on the Photon Slicer, and It shows that "Thicness:0.05". Not 0.025.

X3msnake commented 5 years ago

that is not tge way to check that. open it in validator

No dia quinta-feira, 23 de maio de 2019, script-kitty < notifications@github.com> escreveu:

Open the file "resin-test-25u.B100.2-20.photon" on the Photon Slicer, and It shows that "Thicness:0.05". Not 0.025.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/altLab/photon-resin-calibration/issues/10?email_source=notifications&email_token=ACUR56XJFWM4XLXPJQJBH73PW3GD3A5CNFSM4HPITND2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GVQSJZQ, or mute the thread https://github.com/notifications/unsubscribe-auth/ACUR56RN5ZZTZWLE2IGIYI3PW3GD3ANCNFSM4HPITNDQ .

-- Com os melhores cumprimentos, Vinicius Silva

script-kitty commented 5 years ago

I mean, LCD Viewer of Photon Slicer.

photon
X3msnake commented 5 years ago

Again, that is not the way to read that.

50u is the first base exposure layer, that makes the card file to recieve the upper layer.

Heights are in absolute distance. after that first layers you will see 2 layers for the emulated peel move. Both these exposures are blank, as in the screen mask is completely blocking UV

then it lowers to 75u and stays there for the rest of the process.

What says in the layer heigh is of no interest. what matters is the real position of the layers