Height fix / Apply Offeset is missing from the settings

alvr-org / ALVR

Stream VR games from your PC to your headset via Wi-Fi

MIT License

5.49k stars 487 forks source link

Height fix / Apply Offeset is missing from the settings #22

Closed sitte closed 5 years ago

sitte commented 5 years ago

I'm testing from yesterday. I have to admit it works better than original ALVR. Big congrats.

There is one thing that is missing from original ALVR and that is fix for players height. It was in Other>Apply Offeset in original ALVR. I'm plaing sitting low on couh so Oculus Quest is detecting that I'm just above the ground. In Steam VR home I'm a head laying on the ground or even below it. Can You consider adding this functionality back?

JackD83 commented 5 years ago

Actually, no, You have to calibrate your room in SteamVR correctly:

start the streaming with ALVR
start the room setup
put the headset on the ground and calibrate a "standing" room with the headset on height 0
You might need to prevent the Quest from going into sleep mode by covering up the sensor between the lenses

Now the floor in the Oculus and the floor of SteamVR match. You can press and hold the oculus button on the right controller to recenter the space at your current position!

If you still want to adjust your playspace, use Advanced Settings inside of SteamVR

sitte commented 5 years ago

Thank You. It works.

wiretail commented 4 years ago

A side note for those finding this -- if you've done the full Steam setup at least once, and the floor wanders off later (like after updating ALVR), in the mentioned Advanced Settings you can pick "Fix Floor" and just put a controller on the floor, and it'll reset it super easy.