amat95 / iwidarwin

Automatically exported from code.google.com/p/iwidarwin
0 stars 0 forks source link

Kext for Intel PRO Wireless 3495ABG #116

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
Hi.. Does exist a kext for Intel PRO Wireless 3945abg (I'm using MacOSX
Leopard 10.5.6 but i'm going to upgrade to 10.5.8!).... Thx!

Original issue reported on code.google.com by 085cur35...@gmail.com on 14 Nov 2009 at 3:55

GoogleCodeExporter commented 8 years ago
A stable kext I mean or someone who have tried the unstable kext....

Original comment by 085cur35...@gmail.com on 14 Nov 2009 at 3:58

GoogleCodeExporter commented 8 years ago
if you look for a 3945 driver, there's on who works ONLY with open networks, 
they
don't work yet for WEP or WPA.It's a pre-alpha, i think it could work with 
10.5.8
http://www.facebook.com/pages/mercurysquad/130654692121
you can follow the developpement and download the driver from the post where he 
saids
"People whined, so here you go." click on Voodoo Intel 3945 PRE-ALPHA driver 
pack and
voilà ;)

Original comment by Blacker...@gmail.com on 20 Nov 2009 at 10:14

GoogleCodeExporter commented 8 years ago
Thank you... :) A question... This pre-alpha works on Vanilla Kernel or ather 
ones??
Or it's only tested on Voodoo???
Thx ;)

Original comment by 085cur35...@gmail.com on 24 Nov 2009 at 10:28

GoogleCodeExporter commented 8 years ago
Doesnt work for me :( Not detected

Original comment by k.starze...@gmail.com on 24 Nov 2009 at 11:07

GoogleCodeExporter commented 8 years ago
Bad result for me too... 
It detects the new network interface but everytime i try to active it, system 
crashes
and i need to restart manually because even the mouse is blocked...
I've tried iwidarwin and also Voodoo Intel 3945 PRE-Alpha driver pack.... 
Considering
that i have a different kernel from voodoo, it doesn't work for me! 

Let see other solution :P

Original comment by 085cur35...@gmail.com on 24 Nov 2009 at 11:51

GoogleCodeExporter commented 8 years ago
Hey guys... I have some news ;)
I've installed the new "voodoo intel 3495.kext" file with the older two ones... 
Now,
I can connect using Airport on a free(without wep or wpa passphrases) wifi 
network..
There is an essential configuration:

radio channel --–> Automatic(i think it works only with 11b networks, maybe!)
DHCP Service---> YES!! (I had some problems with fixed addresses... Infact if i 
use
theese last ones, Airport connects for 2 second max. and then disconnects from 
the
network changing all the ip configuration and finally re-setting on dhcp 
use....)

However the connection isn't very fast... Only 11 Mbps max, but is a start 
point! XD
Bye ;)

Original comment by 085cur35...@gmail.com on 25 Nov 2009 at 12:36

GoogleCodeExporter commented 8 years ago
Where you find the "voodoo intel 3495.kext"??? this really works???

Txz...

Original comment by hue...@gmail.com on 25 Nov 2009 at 1:38

GoogleCodeExporter commented 8 years ago
Hi to all!!...
I report you mine problem.
I've the same wireless card, i've just installed the last kext with kexthelper 
but I cant see anything in network 
propieties and airport utility. any wireless card is detected.

I've i've ideneb 10.5.8.

What i should do..

thnaks in advance

Original comment by 0p0...@gmail.com on 25 Nov 2009 at 2:24

GoogleCodeExporter commented 8 years ago
Hi huever... 
Go here --> http://projectcamphor.mercurysquad.com/ --> You can found in the 
post
saying "Voodoo intel 3945: pre-alpha download" the download link of the first 
kext
that sometimes generate some kernel panics.. If you will encounter some panics 
use
this one fixed --> http://www.sendspace.com/file/p9ragy (This link is posted in 
the
last post "for those who got kernel panics with the previous kext")

After you've downloaded the file, use the old 2 files and the fixed must 
replace the
old one...

If you have other problems.. write here! ;)

Original comment by 085cur35...@gmail.com on 25 Nov 2009 at 6:38

GoogleCodeExporter commented 8 years ago
Hi 0p0st0!
So, i have ideneb 1.6 (Mac OS x 10.5.8) too..
Have you installed the fixed kext http://www.sendspace.com/file/p9ragy along the
previous 2 files?!
Check out and keep me informed.. ;)

Original comment by 085cur35...@gmail.com on 25 Nov 2009 at 6:44

GoogleCodeExporter commented 8 years ago
As first I thank you very very much for the answer.
I've installed all 3 kexts files but nothing else is recognized.. 

I report the message log:

Nov 25 20:40:28 filippos-mac-pro kextd[10]: can't generate internal dependency 
graph for 
/System/Library/Extensions/VoodooIntel3945.kext

see you sooon

Original comment by 0p0...@gmail.com on 25 Nov 2009 at 7:45

GoogleCodeExporter commented 8 years ago
I've understand that the dependency problem is causated by the kext 
IO802family.kext but when i replace that 
with one find on the project page the system crash,.

UFf.f. I 'dont know haw i can proceed..

Original comment by 0p0...@gmail.com on 26 Nov 2009 at 1:33

GoogleCodeExporter commented 8 years ago
Missing dependencies:
{
    "com.apple.iokit.IO80211Family" = 
        "A valid compatible version of this dependency cannot be found"
}

Original comment by 0p0...@gmail.com on 26 Nov 2009 at 3:18

GoogleCodeExporter commented 8 years ago
Hi to all!!! 

Finaly i resolved the dependency problem!!!!..

Ok now I can found my wireless network but I can't connect to it.

as soon as connected the airport card became turned off. My network is open.

What could be the problem?

Nov 26 21:08:42 filippos-mac-pro kernel[0]: VoodooIntel3945: chan 6/rate 11: 
power index 57
Nov 26 21:08:42 filippos-mac-pro kernel[0]: VoodooIntel3945: chan 6/rate 22: 
power index 57
Nov 26 21:08:42 filippos-mac-pro kernel[0]: VoodooWireless: ASSOC: Step 6 - 
hardware prepared
Nov 26 21:08:42 filippos-mac-pro kernel[0]: VoodooWireless: ASSOC: Step 7 - 
superclass notified. WE ARE 
ASSOCIATED!
Nov 26 21:08:44 filippos-mac-pro kernel[0]: VoodooWireless: fatal firmware 
error (Software Error)
Nov 26 21:08:44 filippos-mac-pro kernel[0]: VoodooWireless: Timeout resetting 
Rx ring
Nov 26 21:08:44 filippos-mac-pro kernel[0]: VoodooIntel3945: Disabling Firmware 
execution

Original comment by 0p0...@gmail.com on 26 Nov 2009 at 9:35

GoogleCodeExporter commented 8 years ago
Hi... :)
It's strange because this problem you're having was resolved with the fixed 
version
of the kernel...(i had the same problem when i used not-fixed kernel)
I read your report and i've understood that there is an error during the
initialization of the firmware....

Are you sure did you fixed the kernel?! 
If yes, try to delete all the kext relatives to the wificard, reboot and 
install again...
In other words: Let's see how to resolve, don't worry... 

P.S.: I'm not developper or bug tester of this project XD i would like it..... 
:P

Original comment by 085cur35...@gmail.com on 28 Nov 2009 at 3:02

GoogleCodeExporter commented 8 years ago
Hey I will be able to test this kext if you want!

Original comment by Savito...@gmail.com on 1 Jun 2010 at 2:18

GoogleCodeExporter commented 8 years ago
Hi Saviton24,
I already tested this kext on my Hackintosh and I had my positive results. Try 
it if
you want and tell us want happen...

Original comment by 085cur35...@gmail.com on 2 Jun 2010 at 4:46

GoogleCodeExporter commented 8 years ago
Hi, all
I don't have much idea about computer but I install snow leopard 10.6.3 there 
was
audio problem that is already  fixed but I couldn't connect with my home 
wireless
router. there is no wireless signal sign at all except firewire not connected 
under
network. Please I need help, here is some info about my computer; Inspiron 1520
  Motherboard:
      CPU Type                                          Mobile DualCore Intel Core 2
Duo T7300, 2200 MHz (11 x 200)
      Motherboard Name                                  Dell Inspiron 1520
      Motherboard Chipset                               Intel Crestline-PM PM965
      System Memory                                     [ TRIAL VERSION ]
      DIMM1: OCZ OCZ2MV6672G                            2 GB DDR2-667 DDR2 SDRAM 
(5-5-5-15 @ 333 MHz)  (4-4-4-12 @ 266 MHz)  (3-3-3-9 @ 200 MHz)
      DIMM3: OCZ OCZ2MV6672G                            [ TRIAL VERSION ]
      BIOS Type                                         Phoenix (05/16/07)

    Display:
      Video Adapter                                     Standard VGA Graphics Adapter
 (14 MB)
      3D Accelerator                                    nVIDIA GeForce 8600M GT

    Multimedia:
      Audio Adapter                                     SigmaTel STAC9205X @ Intel
82801HBM ICH8M - High Definition Audio Controller [B-0]

    Storage:
      IDE Controller                                    Intel(R) ICH8M Ultra ATA
Storage Controllers - 2850
      IDE Controller                                    Ricoh xD-Picture Card Controller
      IDE Controller                                    Standard AHCI 1.0 Serial ATA
Controller
      Disk Drive                                        ST9160823AS ATA Device  (160
GB, 7200 RPM, SATA-II)
      Optical Drive                                     PIONEER DVD+-RW DR-K17Y ATA
Device  (DVD+R9:4x, DVD+RW:8x/8x, DVD-RW:8x/6x, DVD-ROM:8x, CD:24x/24x/24x 
DVD+RW/DVD-RW)
      SMART Hard Disks Status                           OK

Network:
      Primary IP Address                                [ TRIAL VERSION ]
      Primary MAC Address                               00-1B-77-68-7F-A0
      Network Adapter                                   Bluetooth Device (Personal
Area Network)
      Network Adapter                                   Broadcom 440x 10/100
Integrated Controller
      Network Adapter                                   Intel(R) PRO/Wireless 3945ABG
Network Connection  (10.0 [ TRIAL VERSION ])
      Modem                                             HDA CX11270 Soft Modem

Original comment by wter...@gmail.com on 4 Jun 2010 at 9:25

GoogleCodeExporter commented 8 years ago
Hello,
Sorry for incorrect text. 

I am on voodoo3945.kext. revised kext. The network finds, but not online. Maybe 
you have some further improvements kext.? Or at least something to that 
something else can be done. Thanks. I use version 10.5.8. iAtkos.

Thank you

Original comment by mpxena...@gmail.com on 13 Feb 2011 at 6:53