search

ameltech / sme-se868-a-library

This is the SmartEverything library to manage the GPS component
7 stars 7 forks source link

Fixed compatibility change with ARDUINO_SAMD_SMARTEVERYTHING (no _FOX) #7

Open stnorthern opened 7 years ago

stnorthern commented 7 years ago

Didn't work with some SmartEverything boards because they do not have ARDUINO_SAMD_SMARTEVERYTHING_FOX declared

searobin commented 7 years ago

Are you sure this fix is required?

If you take the latest Smarteverything board library, it should already work. Please try installing the following board: 'Arrow Boards by Axel Elettronica S.r.l.' Versions >= 2.1.0'

Please let me know.

stnorthern commented 7 years ago

I followed the instructions. Not completely sure which version it was. I can check it next week. But I dont see how the code can harm, though. If did the trick for me, so why not for others as well

Søren

On 17 Mar 2017, at 18.54, searobin notifications@github.com<mailto:notifications@github.com> wrote:

Are you sure this fix is required?

If you take the latest Smarteverything board library, it should already work. Please try installing the following board: 'Arrow Boards by Axel Elettronica S.r.l.' Versions >= 2.1.0'

Please let me know.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ameltech/sme-se868-a-library/pull/7#issuecomment-287426549, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AZQrNLdbaipsjNUh8p4m4i72Zh57RMQtks5rmsjEgaJpZM4MgvCp.

searobin commented 7 years ago

Yes. sure, but it could be possible this version of the board lib can be removed in the next future.

In any case, thanks a lot for your contribution.

stnorthern commented 7 years ago

Hi,

I just tried to change board, but all I have is this:

BN: Smart Everything Fox (Native USB Port) VID: 2341 PID: E002 SN: Upload any sketch to obtain it

How can I choose another?

Regards Søren

From: searobin [mailto:notifications@github.com] Sent: 17. marts 2017 18:59 To: ameltech/sme-se868-a-library sme-se868-a-library@noreply.github.com Cc: Søren Theodorsen st@northernvo.com; Author author@noreply.github.com Subject: Re: [ameltech/sme-se868-a-library] Fixed compatibility change with ARDUINO_SAMD_SMARTEVERYTHING (no _FOX) (#7)

Yes. sure, but it could be possible this version of the board lib can be removed in the next future.

In any case, thanks a lot for your contribution.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ameltech/sme-se868-a-library/pull/7#issuecomment-287427794, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AZQrNOcC3J705wB60FPQYd1HRUD0zChvks5rmsntgaJpZM4MgvCp.

searobin commented 7 years ago

Arduino IDE: Tools -> Board Manager ... -> Look for "SmartEverything"

You will find 2 entries: Amel-tech and Arrow Boards.

I suppose you have installed the first one. In this case please remove it and install the Arrow Board library. then you will have to select the fox board from the installed board list

stnorthern commented 7 years ago

Okay. Thanks! How do I know what version I have? Fox one or three? It sais version 3 on the board but just fox. Did you find any updated documentation for it?

Sent from my phone

On 20 Mar 2017, at 16.36, searobin notifications@github.com<mailto:notifications@github.com> wrote:

Arduino IDE: Tools -> Board Manager ... -> Look for "SmartEverything"

You will find 2 entries: Amel-tech and Arrow Boards.

I suppose you have installed the first one. In this case please remove it and install the Arrow Board library. then you will have to select the fox board from the installed board list

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ameltech/sme-se868-a-library/pull/7#issuecomment-287798674, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AZQrNMpDtz_R7BCmi_ytOJEz2SLgRVNiks5rnp1_gaJpZM4MgvCp.

searobin commented 7 years ago

I think you have FOX.

FOX3 does not have sensors on board, just GPS, BLE and Sigfox.

Severino

On 20/03/2017 22:06, stnorthern wrote:

Okay. Thanks! How do I know what version I have? Fox one or three? It sais version 3 on the board but just fox. Did you find any updated documentation for it?

Sent from my phone

On 20 Mar 2017, at 16.36, searobin notifications@github.com<mailto:notifications@github.com> wrote:

Arduino IDE: Tools -> Board Manager ... -> Look for "SmartEverything"

You will find 2 entries: Amel-tech and Arrow Boards.

I suppose you have installed the first one. In this case please remove it and install the Arrow Board library. then you will have to select the fox board from the installed board list

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ameltech/sme-se868-a-library/pull/7#issuecomment-287798674, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AZQrNMpDtz_R7BCmi_ytOJEz2SLgRVNiks5rnp1_gaJpZM4MgvCp.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ameltech/sme-se868-a-library/pull/7#issuecomment-287897826, or mute the thread https://github.com/notifications/unsubscribe-auth/AL8tSkYFJBZlKtpNv8RKkbQNlXnqwDlgks5rnuo5gaJpZM4MgvCp.

--

Severino Peirano Via Colzani 48 - I-20831 Seregno MB seve@ioteam.it mailto:seve@ioteam.it +39 340 2954077